Manual Ion lp2cd usb (page 16 of 92) (English, German, Dutch, French, Italian, Spanish)

161805

Zoom out

Zoom in

1/92

TROUBLESHOOTING

PROBLEM CAUSE SOLUTION

My recordings sound loud

and distorted.

Recording level was too loud.

I can barely hear the

recorded audio when I play it

back.

Recording level was too soft.

It is important to carefully set your recording level prior to

recording. When you first press [RECORD] to enter Rec

Ready Mode, please check the level metering on the

display. Use the RECORD LEVEL knob to adjust the

level. At the loudest moments of the music, the meters

should hit the (-4) or (-2) mark but should not reach

(MAX). If the level of the audio signal is too “hot”, you

will see (!) flash on the right side of the display.

My records are playing at an

unusual pitch.

RPM switch not set correctly.

Please set the RPM switch as appropriate for the record

you wish to play (33/45/78).

I don’t hear anything when I

try to play or record audio

from my vinyl records.

PHONO / LINE switch set to

Line, instead of Phono.

Set the PHONO / LINE switch to Phono to play and

record audio from the turntable.

I don’t hear anything when I

try to play or record external

sources connected to the

Line In.

PHONO / LINE switch set to

Phono, instead of Line.

Set the PHONO / LINE switch to Line to hear and record

audio from the external sources connected to the Line

In.

Erase tracks from Internal Flash Player which may have

already been burnt to a previous disc. In general, we

recommend that you erase the player contents after

each successful burn.

I get a “Not enough space on

blank CDR” message.

Internal Flash Player

contents exceed the

maximum capacity of the CD-

R you are attempting to burn.

Try a higher capacity CD-R. If using a 74min CD-R,

please try an 80min CD-R.

I get a “Too many tracks in

Flash to REC” message.

Erase tracks from the Internal Flash Player to free up

space.

I get a “Can’t Record Flash is

Full” message.

Internal Flash Player is filled

to capacity.

Burn Internal Flash Player contents to CD-R, then erase

all tracks.

I can’t hear my record

playing.

LP 2 CD is already playing

audio from CD or from the

Internal Flash Player.

Press the [STOP] button to ensure that the unit is not

actively playing back or pausing a song.

Cartridge connection is not

secure.

Cartridge must be securely connected to the tonearm

whenever you are using the turntable.

I am experiencing poor sound

quality.

Vinyl record is dirty or

scratched.

Try dusting off and gently wiping the surface of the

record before playing it.

Enable Auto Split in the Menu options and try again.

See “Internal Flash Player Menu Options” section for

details.

My recording came out as

one continuous, long track,

instead of individual tracks.

Auto Split menu option was

disabled.

Use the [SPLIT TRK] to manually split your recordings

into individual tracks. See “Splitting Tracks in the

Internal Flash Player” section for details.

LP 2 CD HOT KEYS

BUTTON COMBINATION

DESCRIPTION

RECORD + STOP Forces system to load an OS (Operating System) upon startup.

Please visit www.ion-audio.com regularly for updates.

RECORD + PLAY Restores the default system parameters.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ion lp2cd usb in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 4,77 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ion lp2cd usb Manual

Product: