Manual Ion lp2cd usb (page 11 of 92) (English, German, Dutch, French, Italian, Spanish)

161805

Zoom out

Zoom in

1/92

6. Use the RECORD LEVEL knob to adjust the level of

the audio signal. The recording level will be

displayed on the screen. It is important to set your

recording levels correctly during this step, otherwise

you may end up with a recording that is too soft or is

too loud and distorted. Try to set the RECORD LEVEL

knob such that the peaks hit the (-4) or (-2) mark but

never reach MAX (“!” will be displayed if the recording

level is too loud and clipping).

7. Once you have adjusted your recording level to its optimal setting, stop the music. If recording

vinyl from the turntable, press the [START/STOP] button to stop the turntable platter.

8. Cue the section which you would like to record. If recording vinyl from the turntable, put the needle

back to the beginning of the section you wish to record.

9. When you are ready to begin recording, press [PLAY]

and then play the music you wish to record. If

recording vinyl from the turntable, immediately press

the [START/STOP] button to begin playing the record.

The red LED will be lit continuously to let you know

that recording is in progress. On the right of the

display, you will see a readout of the remaining

recording time.

10. By default, the LP 2 CD will detect silence between

songs and automatically split them into individual

tracks (Auto Split).

If you have not disabled Auto Split, then proceed to the

next step.

However, if you have disabled Auto Split, you will need to manually insert track markers in between

songs. To insert a track marker, press the [SPLIT TRK] button between songs. The ‘INT’ number

will increment to let you know that a new track was started. Inserting track markers will allow you to

burn songs as individual tracks when burning to CD.

Note: Redbook CD specification requires a 4 second minimum track length. The [SPLIT TRK] will

become active again 4 seconds after it has been pressed.

11. If recording music from a vinyl record, you may wish to pause recording while you flip the record:

a. Press [PAUSE] to temporarily pause recording once you reach the end of Side A.

b. Flip your record to Side B.

c. Press [SPLIT TRK] to insert a marker for the first track on Side B.

d. Press [PLAY] to begin recording Side B.

12. Once you have finished recording, press the [STOP]

button. The display will return to the default Internal

Flash Player screen, as shown on the right.

For information on burning the recordings onto a CD-

R, please refer to “Burning Internal Flash Player

Contents to CD” section.

PLAYING MUSIC FROM THE INTERNAL FLASH PLAYER

Once you have recoded your music to the Internal Flash Player, press the [PLAY] button to hear the

recordings.

 You can cycle through different time display options by

pressing the [DISPLAY] button. Options include

‘Elapsed’, ‘Track Remain’ and ‘Total Remain’.

 Press [FF] or [REW] to skip to the next or previous

track, respectively. Press and hold either button while

a track is playing to quickly scan backward or forward.

 Press [PAUSE] while a track is playing to pause

playback. Press again to resume.

 Press [STOP] to stop playback.

INT:01 PressPLAY

============ =



INT:01 T70:13

=========== =



INT:02 T65:01

New Track!



INT:13/13 T56:14

Int Flash Player



INT:01/13 00:15

========== =



Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ion lp2cd usb in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 4,77 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ion lp2cd usb Manual

Product: