617097
7
Zoom out
Zoom in
Previous page
1/28
Next page
Flash Cube
Quickstart Guide English ( 3 – 6 )
Guía de inicio rápido Español ( 7 – 10 )
Guide d'utilisation rapide Français ( 11 – 14 )
Guida rapida Italiano ( 15 – 18 )
Schnellstart-Anleitung Deutsch ( 19 – 22 )
Snelstartgids Nederlands ( 23 – 26 )
Appendix English ( 27 )
3
AUX IN
Connecting to one Flash Cube:
1. Power on Flash Cube.
2. Press and Release the Bluetooth Connect button to enter Connecting Mode.
3. Navigate to your device’s Bluetooth setup screen, nd Flash Cube, and connect.
4. To disconnect, hold the Bluetooth Connect button on Flash Cube.
Note: The Bluetooth LED will be blinking if not yet connected.
Once connected, the LED will be solid.
Linking two Flash Cube units:
1. Power on each Flash Cube.
2. If necessary, disconnect previous Bluetooth connections by holding down
the Bluetooth Connect button for 3 seconds.
3. Press and Release the Link button on each Flash Cube.
4. Press and Release the Bluetooth Connect button on the Flash Cube
that you want to be the "master" (left channel).
5. Navigate to your device’s Bluetooth setup screen, nd Flash Cube, and connect.
The speakers will relink automatically the next time they are both powered on.
6. To disconnect linking, hold the Link button on the
“master” Flash Cube for 5 seconds.
For detailed instructions, please see the included Quickstart Guide.
Quickstart Guide (English)
Introduction
1. Make sure all items listed in the Box Contents section are included in the box.
2. READ SAFETY INSTRUCTION BOOKLET BEFORE USING THE PRODUCT.
Box Contents
Flash Cube
Remote Control
1/8” Stereo Aux Cable
Quickstart Guide
Safety & Warranty Information Booklet
Support
For the latest information about this product (system requirements, compatibility information,
etc.) and product registration, visit ionaudio.com.
Quick Setup
Connection Diagram
Items not listed in the Box Contents section are sold separately.
Bluetooth Device
(smartphone, tablet, etc.)
Aux Audio Source
(MP3 Player, CD Player,
Stereo Receiver, etc.)
Power
Wireless
Stereo Link
Second Flash Cube
Power
4
Remote Control
1. LEDs On/Off
2. LED Mode Select
3. LED Color Select
4. Bluetooth
®
Connecting
5. Power On/Off
6. Play/Pause
7. Previous Track *
8. Next Track *
9. Volume Up
10. Volume Down
* Note: With some apps, pressing the Previous Track button or Next Track button may go to
another playlist or music genre.
Bluetooth Connecting with Flash Cube
1. Press and hold the power button for two seconds to power on Flash Cube.
2. Press and release the Bluetooth Connecting button to enter Connecting Mode. Flash
Cube's Bluetooth LED will blink during the connection process.
3. Navigate to your device’s Bluetooth setup screen, find Flash Cube, and connect. Flash
Cube’s Bluetooth LED will light up solid when it is connected.
Note: If you experience trouble in connecting, select Forget this Device on your
Bluetooth device and try to connect again.
4. To disconnect, hold the Bluetooth Connecting button on Flash Cube for 3 seconds.
Speaker Linking
To link two Flash Cubes together:
1. Power on each Flash Cube.
2. If necessary, disconnect previous Bluetooth connections by holding down the Bluetooth
Connecting button for 3 seconds.
3. Press and release the Link button on each Flash Cube. Flash Cube's Link LED will blink
and a beeping tone will sound on each Flash Cube during the linking process. Linking
may take up to a minute. Once the two Flash Cubes are fully linked, the Link LEDs on
both Flash Cubes will be lit solid.
4. Press and release the Bluetooth Connecting button on the Flash Cube that you want to
be the master (left channel).
5. Navigate to your device’s Bluetooth setup screen, find Flash Cube, and connect. The
speakers will re-link automatically the next time they are both powered on.
6. To disconnect linking, hold the Link button on the master Flash Cube for 5 seconds.
Note: When using the remote, there will be a response delay of a few seconds with the play
and pause commands.
3
3
6
7
7
8
9
10
10
1
2 4 5
7
AUX IN
Connecting to one Flash Cube:
1. Power on Flash Cube.
2. Press and Release the Bluetooth Connect button to enter Connecting Mode.
3. Navigate to your device’s Bluetooth setup screen, nd Flash Cube, and connect.
4. To disconnect, hold the Bluetooth Connect button on Flash Cube.
Note: The Bluetooth LED will be blinking if not yet connected.
Once connected, the LED will be solid.
Linking two Flash Cube units:
1. Power on each Flash Cube.
2. If necessary, disconnect previous Bluetooth connections by holding down
the Bluetooth Connect button for 3 seconds.
3. Press and Release the Link button on each Flash Cube.
4. Press and Release the Bluetooth Connect button on the Flash Cube
that you want to be the "master" (left channel).
5. Navigate to your device’s Bluetooth setup screen, nd Flash Cube, and connect.
The speakers will relink automatically the next time they are both powered on.
6. To disconnect linking, hold the Link button on the
“master” Flash Cube for 5 seconds.
For detailed instructions, please see the included Quickstart Guide.
Guía de inicio rápido (Español)
Introducción
1. Asegúrese de que todos los artículos indicados en Contenido de la Caja estén incluidos
en la misma.
2. LEA EL FOLLETO DE INSTRUCCIONES DE SEGURIDAD ANTES DE UTILIZAR EL
PRODUCTO.
Contenido de la caja
Flash Cube
Control remoto
Cable auxiliar estéreo de 3,5 mm (1/8 pulg.)
Guía de inicio rápido
Folleto de información sobre la seguridad y la garantía
Soporte
Para obtener la información más reciente acerca de este producto (requisitos de sistema,
información de compatibilidad, etc.) y registrarlo, visite ionaudio.com.
Instalación rápida
Diagrama de conexión
Los elementos que no se enumeran en la sección Contenido de la caja se venden por
separado.
Segundo Flash Cube
Enlace estéreo
inalámbrico
Fuente de audio auxiliary
(reproductor de CD,
reproductor MP3, receptor
estéreo, etc.)
Dispositivo Bluetooth
(smartphone, tableta, etc.)
Suministro
eléctrico
Suministro
eléctrico
8
Control remoto
1. LED encendidos/apagados
2. Selección del modo del LED
3. Selección del color del LED
4. Bluetooth conectando
5. Encendido/apagado
6. Reproducir/Pausa
7. Pista anterior *
8. Pista siguiente *
9. Subir volumen
10. Bajar volumen
* Nota: En algunas aplicaciones, pulsar los botones Previous Track (Pista anterior) o Next
Track (Pista siguiente) hará que vaya a otra lista de reproducción o género musical.
Bluetooth conectando con Flash Cube
1. Mantenga pulsado el botón de encendido durante dos segundos para encender el Flash
Cube.
2. Pulse y suelte el botón Bluetooth Connecting (Bluetooth conectando) para ingresar al
modo de conexión. El LED del Bluetooth del Flash Cube parpadeará durante el proceso
de conexión.
3. Navegue a la pantalla de configuración Bluetooth de su dispositivo, busque Flash Cube
y conéctelo. El LED del Bluetooth del Flash Cube se enciende con luz permanente
cuando está conectado.
Nota: Si tiene problemas para conectarse, seleccione Forget this Device (Olvidar este
dispositivo) en su dispositivo Bluetooth e intente conectarse nuevamente.
4. Para desconectarse, mantenga pulsado el botón Bluetooth Connecting del Flash Cube
durante 3 segundos.
Enlace de altavoces
Cómo enlazar dos Flash Cubes entre sí:
1. Encienda ambos Flash Cubes.
2. De ser necesario, desconecte las conexiones Bluetooth previas manteniendo pulsado el
botón Bluetooth Connecting durante 3 segundos.
3. Pulse y suelte el botón Link (Enlace) de cada Flash Cube. El LED de enlace del Flash
Cube parpadeará y se escuchará un tono de pitido en cada Flash Cube durante el
proceso de enlace. El enlace puede tardar hasta un minuto. Una vez que los dos Flash
Cubes están totalmente enlazados, los LED de enlace en ambos Flash Cubes quedarán
encendidos permanentemente.
4. Pulse y suelte el botón Bluetooth Connecting en el Flash Cube que quiere que sea el
maestro (canal izquierdo).
5. Navegue a la pantalla de configuración Bluetooth de su dispositivo, busque Flash Cube
y conéctelo. Los altavoces vuelven a enlazarse automáticamente la próxima vez que se
enciendan.
6. Para cortar el enlace, mantenga pulsado el botón Link del Flash Cube maestro durante 5
segundos.
Nota: Cuando utilice el control remoto, habrá unos segundos de demora en la respuesta de
los comandos reproducir y pausa.
3
3
6
7
7
8
9
10
10
1
2 4 5
9
Características
Panel frontal
1. Encendido: Mantenga pulsado este
botón táctil capacitivo durante 2
segundos para encender o apagar el
Flash Cube.
Nota: El Flash Cube se apagará
después de 1 hora sin reproducir
audio y sin conexión Bluetooth.
2. Bajar volumen: Pulse y suelte este
botón táctil capacitivo para
disminuir el volumen del altavoz.
3. Subir volumen: Pulse y suelte este
botón táctil capacitivo para
aumentar el volumen del altavoz.
4. Reproducir/Pausa: Pulse y suelte
este botón táctil capacitivo para
reproducir o hacer una pausa en la
fuente de sonido.
5. Pista siguiente: Pulse y suelte este
botón táctil capacitivo para saltar a la pista siguiente.
Nota: En algunas aplicaciones, pulsar el botón Next Track hará que vaya a otra lista de
reproducción o género musical.
6. Modo de luz: Pulse y suelte este botón táctil capacitivo Light Mode (Modo de luz) para
alternar entre estas opciones diferentes:
Ciclo de color: Las luces brillan suavemente y cambian de un color a otro. Este
es el modo predeterminado la primera vez que se enciende el Flash Cube. Una
vez encendido el altavoz, las luces se encenderán antes de que comience la
música.
Sincronización con el ritmo: Las luces reaccionan al ritmo de la música.
Apagadas: Las luces se apagan.
7. LED de volumen: Estos segmentos de LED se iluminan a medida que se ajusta el control
de volumen.
8. Tweeter: Emite las frecuencias altas de la fuente de sonido.
9. Woofer: Emite las frecuencias bajas de la fuente de sonido.
1
2 3 4 5 6
8
9
5
6
7
1
2
4
7
3
11
AUX IN
Connecting to one Flash Cube:
1. Power on Flash Cube.
2. Press and Release the Bluetooth Connect button to enter Connecting Mode.
3. Navigate to your device’s Bluetooth setup screen, nd Flash Cube, and connect.
4. To disconnect, hold the Bluetooth Connect button on Flash Cube.
Note: The Bluetooth LED will be blinking if not yet connected.
Once connected, the LED will be solid.
Linking two Flash Cube units:
1. Power on each Flash Cube.
2. If necessary, disconnect previous Bluetooth connections by holding down
the Bluetooth Connect button for 3 seconds.
3. Press and Release the Link button on each Flash Cube.
4. Press and Release the Bluetooth Connect button on the Flash Cube
that you want to be the "master" (left channel).
5. Navigate to your device’s Bluetooth setup screen, nd Flash Cube, and connect.
The speakers will relink automatically the next time they are both powered on.
6. To disconnect linking, hold the Link button on the
“master” Flash Cube for 5 seconds.
For detailed instructions, please see the included Quickstart Guide.
Guide d'utilisation rapide (Français)
Présentation
1. Veuillez vous assurer que tous les articles énumérés dans la section Contenu de la boîte
de ce guide sont inclus dans la boîte.
2. VEUILLEZ LIRE LE LIVRET DES CONSIGNES DE SÉCURITÉ AVANT D'UTILISER LE
PRODUIT.
Contenu de la boîte
Flash Cube
Télécommande
Câble auxiliaire stéréo 3,5 mm (1/8 po)
Guide d'utilisation rapide
Livret des consignes de sécurité et des informations concernant la garantie
Assistance technique
Pour les toutes dernières informations concernant ce produit (configuration système,
compatibilité, etc.), veuillez visiter le site ionaudio.com.
Installation
Schéma de connexion
Les éléments qui ne figurent pas dans la section Contenu de la boîte sont vendus
séparément.
Connexion stéréo
sans fil
Deuxième Flash Cube
Autres sources auxiliaires
(lecteur de disques
compacts, lecteur MP3,
récepteur stéréo, etc.)
Périphérique Bluetooth
(smartphone, tablette,
etc.)
Alimentation
Alimentation
21
Funktionen
Vorderseite
1. Stromversorgung: Halten Sie diese
kapazitive Touch-Taste 2 Sekunden
lang gedrückt, um den Flash Cube
ein- oder auszuschalten.
Hinweis: Der Flash Cube schaltet
sich nach 1 Stunde aus, wenn keine
Musik gespielt wird und es keine
Bluetooth-Verbindung gibt.
2. Lautstärke verringern: Drücken Sie
kurz diese kapazitive Touch-Taste,
um die Lautstärke zu verringern.
3. Lautstärke erhöhen: Drücken Sie
kurz diese kapazitive Touch-Taste,
um die Lautstärke zu erhöhen.
4. Wiedergabe/Pause: Drücken Sie
kurz diese kapazitive Touch-Taste,
um die Tonquelle wiederzugeben
oder zu pausieren.
5. Nächster Track: Drücken Sie kurz diese kapazitive Touch-Taste, um zum nächsten
Track zu springen.
Hinweis: Bei einigen Apps kann durch Drücken der Taste Nächster Track zu einer
anderen Wiedergabeliste oder zu einem anderen Musikgenre gewechselt werden.
6. Licht-Modus: Drücken Sie kurz die kapazitive Touch-Taste Licht-Modus, um durch
diese verschiedenen Optionen zu wechseln:
Farbwahl: Die Lichter glühen langsam und wechseln die Farben. Dies ist der
Standardmodus beim ersten Einschalten des Flash Cube. Sobald der
Lautsprecher eingeschaltet ist, werden sich die Lichter einschalten noch bevor
irgendeine Musik zu spielen beginnt.
Takt: Das Licht regiert auf den Takt der Musik.
AUS: Die Lichter werden ausgeschaltet.
7. Pegel-LEDs: Diese LED-Segmente leuchten sobald der Lautstärkeregler angepasst wird.
8. Hochtöner: Gibt die hohen Frequenzen der Tonquelle wieder.
9. Woofer: Gibt die tiefen Frequenzen der Tonquelle wieder.
1
2 3 4 5 6
8
9
5
6
7
1
2
4
7
3
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ion Flash Cube at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ion Flash Cube in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info