Manual Ion DESK ROCKER (page 7 of 52) (English, German, Dutch, French, Italian, Spanish)

519169

Zoom out

Zoom in

1/52

Tip: While in Sounds and

Audio Devices, we

recommend turning off

Windows system sounds

so they do not interfere

with your audio while

recording or listening to

your music. You can do

this by clicking on the

Sounds tab and selecting

No Sounds under the

Sound Scheme pull-down

menu.

CONFIGURATION UNDER WINDOWS

The DESK ROCKER USB speakers are plug-and-play under Windows XP/Vista so there is

no special driver installation necessary. Simply power on the speakers, connect them to

your computer’s USB port and all the necessary drivers will be automatically installed.

When you first plug the speakers into your computer, you will

see a few messages similar to the one shown on the left. Allow

the process to complete.

Once the process has completed, you will see the

message displayed on the left. Your speakers are

now ready to use.

You may choose to use the DESK ROCKER USB

speakers as the default audio output for your

computer. To access your computer’s default audio

preferences, go to Start

 Control Panel

 Sounds and Audio Devices and click on the

Audio tab.

You will see the screen displayed on the left.

To select the speakers

as the default

playback device,

choose USB Audio

CODEC under Sound

Playback.

To select the speakers

as the default

recording device,

choose USB Audio

CODEC under Sound

Recording.

ABOUT LATENCY & THIRD-PARTY ASIO DRIVERS

“Latency” is the delay between the moment when audio is generated and the moment when

you actually hear it. Higher latency means a longer delay.

The DESK ROCKER USB speakers feature zero latency direct monitoring so you don’t have

to worry about latency when monitoring input sources connected to the rear of the speakers.

However, latency may become an issue when using software synths and instruments.

Generally, you want to keep latency as low as possible while still allowing your equipment to

operate without glitches. Latency and buffering is usually adjusted in your software’s

Preferences settings.

If you still experience too much latency or “lag” when using software synths and

instruments, you might want to download one of the free and widely available ASIO (Audio

Stream Input/Output) drivers from the Internet. In general, ASIO drivers may perform better

and with lower latency since they create a more efficient communication between audio

devices and software. You may download and install the free ASIO4ALL driver (PC) by

visiting www.asio4all.com

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ion DESK ROCKER in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 2,8 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ion DESK ROCKER Manual

Product: