519166
6
Zoom out
Zoom in
Previous page
1/48
Next page
6
BACK PANEL
1. USB PORT – Connect a USB cable from the CD DIRECT to a computer to record or listen to audio.
2. GAIN ADJUSTMENTBefore recording through a USB connection, use this knob to adjust the recording gain.
The level should be high enough so that the loudest part of the song does not distort or "clip".
3. AUX OUT RCA Audio outputs to connect to external speakers or an amp.
4. POWER CONNECTION – The built-in power cable is located here.
BEFORE RECORDING TO CD
Before you start recording, make sure that you understand the following points:
CD specifications limit the number of tracks to 99.
You can not create recording tracks shorter than 10 seconds.
Once you have recorded on a CD-R disc, the data cannot be erased.
A recorded CD-R can be played back in a regular CD player only after finalizing.
To add more recordings to a finalized CD-RW, unfinalize it.
When all available space on a CD-RW has been recorded, you can record additional tracks by erasing previously
recorded tracks. Note that you can only erase all tracks or the last track.
If the STOP button or PLAY/PAUSE f button is pressed within 10 seconds from the beginning of recording,
the unit will not stop recording.
When the recording is finished, “REC” and “- ENd –“ blink for a few seconds, and the unit then goes into stop
mode. Do not apply any shock or vibration to the unit during blinking.
If the disc reaches the end during recording, the unit will automatically finalize the disc.
If the disc reaches the end of the 99th track during recording, the unit will finalize the disc automatically.
The recording time of a track may differ slightly from the original source.
When a partially recorded disc is inserted, recording will begin after the last recorded track.
The AUTO REC function automatically separates tracks when it detects the volume level (in dB) set by the
MANUAL/AUTO button. When using this function, your CD may have more or fewer tracks than its source due to
unexpected quiet or noisy parts, which may trigger -- or not trigger -- the automatic track separation in unexpected
ways. If this occurs, use the MANUAL/AUTO button to adjust the volume level appropriately.
When the disc which was recorded by this unit is played back by some other players, a small noise may be heard
at the point that the track is divided.
1
2
3
4
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ion CD Direct at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ion CD Direct in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info