Manual Ion ARCHIVE LP (page 4 of 28) (English, German, Dutch, French, Italian, Spanish)

519161

Zoom out

Zoom in

1/28

1. With EZ Vinyl/Tape Converter installed on your computer, use the included USB cable to connect Archive LP's

USB port to an available USB port on your computer.

2. On your computer, you can open EZ Vinyl/Tape Converter by going to Start Menu  All Programs (Windows)

or the Applications menu (Mac).

3. Follow the on-screen instructions to set up your recording. When prompted to play your music, move Archive

LP's tonearm over the record to start playback.

Note: To listen to a record while it's playing, listen through your computer's speakers, or connect Archive LP's

RCA outputs to a stereo system or powered speakers. Archive LP must be connected to the computer in order

for EZ Vinyl/Tape Converter to advance to the next step.

4. When you have finished recording, raise Archive LP's tonearm from the record and return it to its arm clip.

Features

1. Platter – Place your record here.

2. Tonearm* – The tonearm can be raised and lowered by

hand, or by pressing the raise / lower lever. Please note

that the tonearm needs to be moved away from resting

position (on the arm clip) for the turntable motor to

activate. When the tonearm is placed back in its resting

position, the turntable motor will deactivate if Autostop

has been turned on.

3. Arm Clip – This specially designed arm clip secures the

tonearm while at rest or when not in use. The arm clip

has been designed to remain in the up position while

unlocked.

4. Raise / Lower Lever – Raises and lowers the tonearm.

5. 33 / 45 / 78 Switch – This switch controls the RPM

of the turntable platter.

6. 45 RPM Adapter Holder – Holds the included 45

RPM adapter. When not using the adapter, please

place it in this holder.

7. Autostop Switch – This switch turns autostop on or

off. When autostop is on, the platter will start spinning

when the tonearm is placed over the record and stop

spinning when the record has reached the end. (When

autostop is off, the platter will always spin regardless

of the position of the tonearm.)

Note: If your vinyl record stops before it reaches the

end of the music, turn Autostop to the off position for

this particular record. This is generally recommended

for 45 RPM records.

8. Speakers – Listen to the audio from your playing vinyl

record.

9. Volume – Controls the audio output from the internal

speakers but does not affect the RCA output sound

level or the USB signal level.

10. RCA Output** – The audio from a playing vinyl record

is sent to this line-level coaxial audio output. This must

not be connected to phono level devices. (If you do not

already have an RCA cable, this can be found at a local electronics retailer.)

11. USB Audio Output – Use the included USB cable to connect your turntable to your computer. The USB

connection will send audio from the turntable to your computer. Please see the Using Archive LP With

Your Computer section of this manual for information.

12. Power – Use the included adapter to connect to wall power.

13. Power Button – Press this button to turn Archive LP on/off.

IMPORTANT: Remove the plastic

cartridge cover (needle cover) before

eratin

the turntable.

** WARNING: The RCA outputs are LINE

level. Please only connect these to LINE

level inputs. You may damage your

receiver if you plug in a LINE level device

into a PHONO level in

ut.

AUTO STOP

ON OFF

* IMPORTANT: If the turntable's stylus

becomes worn, purchase a replacement at

ionaudio.com/ict09rs. If you play 78

RPM records, we recommend using a 78

RPM stylus, which you can purchase at

ionaudio.com/ict06rs.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ion ARCHIVE LP in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,5 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ion ARCHIVE LP Manual

Product: