611565

Iomega StorCenter ix4-200d Manual

82
Zoom out
Zoom in
Previous page
1/109
Next page
Manually Configuring the Network
You can have direct control of the network setup.
1. Click Modify Network Settings.
2. Uncheck Automatically configure DNS, WINS, and all IP addresses (DHCP).
3. DNS Servers — enter the IP addresses of the DNS (Domain Name System) servers. DNS is used for translating the domain name to IP addresses.
4. WINS Servers — enter the IP addresses of the WINS server.
5. From the Bonding Mode drop-down menu, choose one of the following:
Load Balance — increases bandwidth by distributing the load across multiple NICs.
Link Aggregation — increases bandwidth by distributing the load across multiple ports in a switch.
Failover — provides recovery from a failure, such that if one NIC should fail, your system still has network connectivity with the other NIC.
6. Click Apply to save your settings.
If a DHCP server is unavailable for a network interface card (NIC), the device could auto-assign an IP address, or you can uncheck the Automatically
acquire network address (DHCP) checkbox found in the Information section of a NIC.
7. The following are settings you can change in the Information section:
IP Address — the static IP address of the Iomega StorCenter ix4-200d. An unused IP address from within the range used by the LAN should be
used.
If you are going to use Remote Access, it is recommended to use a static IP address for a NIC.
Subnet Mask — the subnet that the IP address belongs to. The default value is 255.255.255.0.
Gateway — the gateway IP address needs to be entered in this field.
8. Click Apply to save your settings.
VLAN Settings
Each NIC in your Iomega StorCenter ix4-200d can be added to up to four Virtual LANs (VLAN). For more information on adding a NIC to a VLAN, refer to VLAN
Settings.
Bonding NICs
If your Iomega StorCenter ix4-200d has multiple network interface cards (NICs), you can bond those NICs. Refer to Bonding NICs.
82 Iomega StorCenter ix4-200d
… 82 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Iomega StorCenter ix4-200d at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Iomega StorCenter ix4-200d in the language / languages: English as an attachment in your email.

The manual is 0,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info