744562
9
Zoom out
Zoom in
Previous page
1/44
Next page
Energy Distribution 2015 9
INSTALLATION
UNPACKING
Energy Distribution packages your Invicta series
woodstove with the greatest care so that it ships
safely. Under certain circumstances, however,
damage may occur during transit and handling. When
you receive the Invicta, carefully unpack and inspect
the stove and all accompanying parts. Ensure that all
parts are included inside the stove. If any parts are
damaged or missing, please contact your authorized
Invicta dealer immediately.
Be sure to remove the packaging material in the flue
collar and above the baffle before installing the
chimney.
PACK LIST
Invicta serie Akan, Antaya, Gaya Ardoise, Gaya
Feuille, Itaya, Symphonia, Theia Woodstove
Owner’s Manual
The label is attached by a cable below the ashtray
inside the stove.
Figure 2 - Label Location
INSTALLING YOUR STOVE
Choose a place to install your Invicta woodstove.
Consider the location of your stove for optimum
heating efficiency. In general, it is better to place your
stove in a main living area, rather than in a basement
or other confined space.
Inspect this location to make sure that the stove and
stovepipes will have the required clearance from
combustible materials that are near the stove.
Combustibles include walls, floor, ceiling, and
chimney chase. You must carefully consider the
clearances to all of these combustibles before actually
connecting your stove.
If the floor is made of combustible material, then a
non-combustible floor protector is required between
the floor and the stove. An example of a non-
combustible floor protector is a hearth constructed
with a continuous layer of tile, brick, slate, glass or
another non-combustible facing. There is no R-value
requirement.
If you use a rear connector pipe, ensure it is listed with
Underwriter’s Laboratories. Check the listing of your
pipe with UL for the correct clearances.
The diagrams in this manual represent typical
installations, but are specific to the Security Chimney
brand.
Clearances to NFPA Code 211 Protected
Surfaces
You can reduce the clearances to combustible
surfaces by using any National Fire Protection Agency
(NFPA) approved wall protection system with
additional approval of the regulatory authority having
jurisdiction in your area. Please refer to NFPA Code
211 for specifications and complete details. You can
obtain this information directly from the NFPA.
National Fire Protection Agency
Batterymarch Park
Quincy, MA 02269
1-800-344-3555
1-617-770-3000 www.nfpa.org
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Invicta Symphonia at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Invicta Symphonia in the language / languages: English as an attachment in your email.

The manual is 9,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info