509862
28
Zoom out
Zoom in
Previous page
1/38
Next page
24
Remote management and control
over HDMS
The IDLV-4000P-xx series can be managed by the PC software application called Headend Devices
Management System (HDMS). The HDMS software is supplied on the CD with this product and can manage a
single or multiple units.
INSTALL HDMS ON A PC
The HDMS Installation.exe le could be found on the CD-ROM which is enclosed in the original package. Detail
information about installation can be found in the HDMS Reference Guide.
CONNECT TO HDMS
After installation of HDMS, you need to congure the local settings of the IDLV-4000P-xx (s) which is/are to be
managed through HDMS.
LOGIN TO HDMS
To login on HDMS, a user account and password are needed. Default user account is: hdms, password is: hdms.
You can create or delete new accounts. Detailed information can be found in the HDMS Reference Guide.
ADD IDLV-4000P-XX TO HMDS
Make sure the IDLV-4000P-xx are well connected to the network and that the PC (with the HDMS installed)
can access the IDLV-4000P-xx. Press the icon in the top left of the window in HDMS and the system will
start searching for connected IDLV-4000P-xx units automatically. Devices that are found will be displayed in the
Devices Window in HDMS.
When a new IDLV-4000P-xx is added to the remote control network, you can press to refresh the network.
The newly added unit will be added into the HDMS automatically. For other methods for adding one or a group of
IDLV-4000P-xx, please refer to the HDMS Reference Guide.
IDLV-4000P-XX IN HDMS
Double click on the device in the Devices Management window to open the console of the IDLV-4000P-xx. The
HDMS supports full operation of the IDLV-4000P-xx. Parameters are grouped in three panels:
The Input Setting, provides the full operation on inputs parameters.
The Output Setting, allows the full operation control functions on outputs parameters.
The System Setting, shows the general device management parameters.
Each console has four control buttons:
Apply: to apply the current settings for the unit which is being accessed.
Refresh: to obtain the current settings from the unit.
Load: to load pre-settings les to the HDMS, and press “Apply” to apply the pre-settings for the unit.
Save: save the user’s settings as an .xml le.
Remark: When duplicating the conguration of one device to the other unit(s), you need to modify the System
Setting (such as IP address, gateway, Unit name, etc) manually after loading the .xml le.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inverto IDLV-4000P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inverto IDLV-4000P in the language / languages: English as an attachment in your email.

The manual is 2,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info