424988
12
Zoom out
Zoom in
Previous page
1/125
Next page
1. Installation guide
1.1 Connection
1.1.1 Connection to the terrestrial antenna
The digital receiver is connected directly to a terrestrial antenna on the ANTENNA IN connector (see page
4, connections on the rear panel item 8). , by means of a coaxial cable. This connection must be done
while the receiver is switched off.
1.1.2 Connection to the TV set
Digital receivers and TV sets are usually connected by means of a SCART cable. Simply connect the two
ends of the cable with the main socket on the TV set and with the TV socket on the receiver, respectively.
The SCART connection ensures that audio and video signals are transmitted to the TV set in optimum
quality.
If your TV set is not equipped with a SCART socket: the receiver is also optionally obtainable fitted with
a built-in HF modulator. In this case, use an antenna (coaxial) cable to connect the HF output of the receiver
(socket “RF OUT“) with the antenna input socket of the TV set. The digital TV programme currently being
received is converted in the receiver to a UHF channel (channel selectable via the installation menu), and
is transmitted to the TV set via the antenna cable. The antenna cable previously connected to the TV set
should now be connected to the HF input socket of the receiver (socket “ANT IN“). In this way, the terrestrial
antenna connection is looped through the receiver.
If you also have a video recorder connected to the terrestrial antenna cable, this terrestrial antenna
connection should run first from the receiver to the video recorder, and only from there to the TV set. As
in this case the audio and video signals have to be modulated for high-frequency transmission on a UHF
channel, signal quality is not as good compared to a connection with a SCART cable.
1.1.3 Connection to a video recorder
Just as the TV set, the video recorder is connected to the receiver via a SCART connection. Use the “VCR
SCART” socket for this purpose.
1.1.4 Connection to a hi-fi system
The audio quality of digital TV and radio programmes can be enjoyed even more when reproduced through
a hi-fi system. To do this, use a RCA cinch stereo cable to connect the sockets marked “Audio L/R” on
the receiver to one of the inputs of your hi-fi system marked either “Line”, “Aux”, “Spare” or “Extra”.
If your hi-fi system is equipped with a digital audio input facility, you may use a digital RCA cinch cable
to connect the electrical audio digital output of your receiver (socket DIGITAL AUDIO COAX) to your hi-fi
or Dolby Digital system.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inverto idl7000m at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inverto idl7000m in the language / languages: English, German, French, Spanish, Spanish, Finnish as an attachment in your email.

The manual is 5,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Inverto idl7000m

Inverto idl7000m User Manual - English, Swedish, Finnish - 125 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info