509749

Inverto IDL7000m TCI Manual

14
Zoom out
Zoom in
Previous page
1/125
Next page
2.1.4 Hard disk Settings
Formatting the Hard disk: If you have to format your Hard
disk e.g. in case of a defective function, select activating
formatting. Warning: All stored data (recorded movies of
the library etc.) will get lost during formatting. Confirm the
desired function with the red (No) or the green (Yes) key.
2.1.5 Time/Date
General Settings: If the “Automatic Time Setup” (bottom
right) is set to “On”, the receiver will receive the digital clock
time and date as broadcast by the digital TV programme
providers. The DVB standard will broadcast this in the GMT
time zone. In order to display local time correctly, it may be necessary to set a time offset, indicating the
difference between local time and GMT (e.g. in Germany daylight savings time in summer is + 2h, winter
time is + 1h).
Clock mode: The time can be displayed in 12 or 24 hour format.
Automatic Time Setup: The receiver can either receive the current time via the digital TV programmes
(On), or it can calculate current time independently (Off). In this case, the current time must be selected
under “General Settings”. On this page use the “OK/Menu” key, then the time must be entered manually
by using the directional keys.
2.1.6 Programme Search
There are various ways of performing a programme search. Using the “OK/Menu“ key, call up the Main
Menu, select the sub-menu “Installation/Set-up“ followed by “Channel Search“ using the directional keys
(and confirm each time by pressing the “OK/Menu“ key). You can now choose between the various search
methods available.
2.1.6.1 Auto Tune
The Auto Tune scan function can be used to allow the receiver to search for new programmes. In this
case, the entire frequency range is scanned.
Then, it is necessary to choose between “Add new services” or “Replace existing services” options.
The “Add new services” deletes all the channels which were in the memory and scan. The option “Replace
existing services” scans and add the new channels to the existing list in the receiver.
2.1.6.2 Manual Tune
In case specific programmes cannot be found by means of the automatic search, e.g. because the
programme broadcasting format does not comply with DVB standards, you may employ a manual programme
search function.
In this on-screen display you will have to specifically input the broadcast channel/frequency, TX mode and
Guard interval if available (Auto mode field in mode No). If the TX mode and guard interval are not known,
it is possible to setup Auto mode to Yes.
Press the yellow key on the remote control to activate the search.
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inverto IDL7000m TCI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inverto IDL7000m TCI in the language / languages: English, German, French, Spanish, Spanish, Finnish as an attachment in your email.

The manual is 5,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info