509750

Inverto IDL7000m SCI Manual

6
Zoom out
Zoom in
Previous page
1/87
Next page
This short instruction explains the most important functions to ensure that you can directly watch television and make recordings with
your new digital receiver. Please note, additional adjustments may be required.
Please read the general safety instructions carefully.
1.1. Connections
Note:
Do not connect the digital receiver to the main power yet.
1.1.1. Connection LNB (Low Noise Block) with the digital satellite receiver
The LNB on satellite antenna dish can be connected to
a digital receiver in different ways. One of the ways is to
connect the LNB, on the satellite dish, directly to a digital
receiver in the “LNB in” connector of the Tuner 1, by means
of a coaxial cable. Use a loop-through cable to make loop
through between Tuner1 and Tuner2
(see picture 4).
Note: In case of this confi guration, user has to set “Loop
1->2” option in installation type of antenna settings (see
chapter 4.1.5 Antenna settings).
A second way is to use two different satellite dishes. One
LNB from the fi rst satellite dish connect directly to the “LNB
in” connector of the Tuner 1 and second LNB, on the second
satellite dish, connect directly to the “LNB in” connector of
the Tuner 2 (see picture 4a).
Note:
In case of this confi guration, user has to set “Dual” option
in installation type of antenna settings (see chapter 4.1.5
Antenna settings).
A third way is to use one antenna dish with one twin LNB,
which has two outputs. One output from the twin LNB
connect directly to the “LNB in” connector of the Tuner 1 and
second output from the same twin LNB, connect directly to
the “LNB in” connector of the Tuner 2 (see picture 4b).
Note:
In case of this confi guration, user has to set “Dual” option
in installation type of antenna settings (see chapter 4.1.5
Antenna settings).
1. Quick installation guide
Picture 4
Picture 4A
Picture 4B
5
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inverto IDL7000m SCI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inverto IDL7000m SCI in the language / languages: English, Swedish, Finnish as an attachment in your email.

The manual is 2,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info