509751
9
Zoom out
Zoom in
Previous page
1/25
Next page
IDL7000PVR-T-UK 17/1/06 14:59 Page 8
Composite
C M Y CM MY CY CMY K
1.1 Connection
1.1.1 Connection to the terrestrial antenna:
The digital receiver is connected directly to a terrestrial antenna on the Tuner 1 Ant In connection ( see
1.2 Installation diagrams ) by means of a coaxial cable. This connection must be done while the receiver
is switched off.
- Please now ensure that the small RF cable supplied is connected to Tuner 1 RF loop-through to
Tuner 2 ant in.
1.1.2 Connections to the TV set:
Digital receivers and TV sets are usually connected by means of a SCART cable. Simply connect the two
ends of the cable with the main SCART socket on the TV set and the SCART socket on the receiver
marked TV. The SCART connection ensures that audio and video signals are transmitted to the TV set
in optimum quality.
If your TV set is not equipped with a SCART socket: the receiver is also optionally fitted with a built-in HF
modulator. In this case, use an antenna (coaxial) cable to connect Tuner 2 RF loop-through to ANT In and
then a further Coaxial cable from RF OUT to the Coaxial socket of the TV set. The digital TV programme
currently being received is converted in the receiver to a UHF channel and is transmitted to the TV set
via the antenna coaxial cable. If you also have a VCR connected to the terrestrial antenna cable, this
connection should first run from the receiver as described above to the VCR and then from the VCR to
the TV set. As in this case the audio and video signals have to be modulated for a high-frequency
transmission on a UHF channel, signal quality is not as good compared to a connection with a SCART
cable.
1.1.3 Connection to a Video Recorder or other recording device:
Just as the TV set, the video recorder is connected to the receiver via a SCART connection.
Use the SCART socket marked VCR for this purpose.
1.1.4 Connection to a Hi-Fi System
The audio quality of digital TV and radio programmes can be enjoyed even more when reproduced through
a Hi-Fi system. To do this, use a RCA cinch stereo cable to connect the sockets marked “Audio L/R” on
the receiver to one of the inputs on your Hi-Fi system marked either “line”, “Aux”, “Spare” or “Extra”. If
your Hi-Fi system is equipped with a digital audio input facility, you may use a Digital RCA cinch cable to
connect the electrical audio digital output of your receiver ( socket marked DIGITAL AUDIO COAX ) to
your Hi-Fi or Dolby Digital system.
1. Installation guide
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inverto IDL7000 PVR-T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inverto IDL7000 PVR-T in the language / languages: English as an attachment in your email.

The manual is 2,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Inverto IDL7000 PVR-T

Inverto IDL7000 PVR-T User Manual - English, German, French, Spanish, Finnish - 126 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info