509656
18
Zoom out
Zoom in
Previous page
1/58
Next page
En
15
Control Panel
In this chapter, all options of the Control Panel menu
will be described.
In each of the settings screens, use the Right arrow
key to view the available options for each parameter
on the right side of the screen, press OK to effect a
selection and the Left arrow key to go back to the
parameter list on the left side of the screen.
USER PREFERENCES
This is where you can set the basic parameters of
your digital receiver.
Default TV Channel list
Select the TV channel list that will be used by default
when operating the receiver.
Default Radio Channel list
Select the Radio channel list that will be used by default when operating the receiver.
Pop-up Timeout
When switching between programmes, for instance, a message is briey displayed with programme information
(Now/Next EPG). The duration that this message is displayed can be set, from 1 to 9 seconds.
History depth
You can set the history of previously selected programmes from 1-5, and then use the “Back” key on the remote
control to switch between them.
Software updates
Automatic software update: When set to “On” your receiver will be automatically updated while in stand-
by, according to the settings in the sub-menu “Software update behavior”. By choosing “Off” updates will
not be performed automatically.
Software update behavior: By choosing “Notify”, you will receive a pop-up message when a new update
is available. By choosing “Download and notify”, you will receive a pop-up message when a new update is
downloaded. By choosing “Download and Auto-install”, any update will be automatically installed.
Energy mode
You can switch the receiver into three different stand-by modes:
Maximum performance: If you prefer to get picture and sound immediately after pressing the “On” button,
use this option.
Standard mode: Power consumption is reduced while the unit is not in use. This mode turns off some
parts of the receiver, allowing it to start-up again quickly when the unit is turned on.
Economic: The receiver will enter into a deep-sleep energy-saving mode (< 1W, extended start-up time
appr. 25 seconds). When in “Economic” mode, only the stand-by LED indication will be lit.
TIME / DAT E
Use this menu to set the time and date.
Automatic Time Update
If the “Automatic Time Update” is set to “On”, the
receiver will receive the time and date automatically
from the broadcast signal.
Note: Some networks may transmit incorrect time
or date.
Date
Use this option to manually set the date.
Local Time
Use this option to manually set the time.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inverto IDL 6650n at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inverto IDL 6650n in the language / languages: English, German as an attachment in your email.

The manual is 1,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Inverto IDL 6650n

Inverto IDL 6650n Quick start guide - English, German - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info