509676
31
Zoom out
Zoom in
Previous page
1/96
Next page
26
ERROR POSSIBLE CAUSES
POSSIBLE
SOLUTIONS
No image, no sound, no display
No power supply Check connection cables
Short circuit in coaxial cable
Disconnect device from
mains power supply,
eliminate the short circuit
in the coaxial cable or
connections, reconnect, and
activate device
Defective or missing cables Check connecting cables
Wrong video format selected in the
OSD settings
Check the settings to make
sure your TV supports the
selected format
Small blocks in the video,
occasionally no sound, occasionally
no signal
Signal too weak
Check for defective cables
or connectors. Alternatively,
reduce the coaxial cable
length.
The displayed time differs from the
current program
Incorrect time settings
Check the settings and
correct the time.
Scrambled programs are not
received
The CI module or CA card is not
correctly inserted
Re-insert the Card and/or
module
The CI module or CA card belong to
a different decoding system
Use a CA module or Card for
the specic decoding system
Sound OK, but no image Device is set to a Radio channel Change to TV mode
The Remote Control does not work
The batteries are weak Replace the batteries
The batteries are installed
incorrectly
Install the batteries,
observing the correct
polarity, as marked in the
battery compartment
The remote control is not pointed
directly at the receiver
Aim the Remote Control
directly at the front of the
receiver
The front of the receiver is blocked
Remove the obstruction from
in front of the receiver
Previously receivable programs are
no longer received
The frequency has changed Start a channel search
There is a problem with the signal
Check all cables and
connectors connected to the
RECEIVER.
Troubleshooting
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inverto IDL 5650m at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inverto IDL 5650m in the language / languages: English, German, French as an attachment in your email.

The manual is 3,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info