509676
19
Zoom out
Zoom in
Previous page
1/96
Next page
14
STANDBY MODE
You can put the receiver in standby mode to reduce the power consumption while the unit is not in use. The
standby mode turns off some parts of the receiver, but does not fully turn off the receiver, allowing it to start
up again very quickly when the unit is turned on. If “Energy saving” is set (see User Preferences section),
the receiver will enter a deep sleep energy saving mode as long as no recordings are scheduled on Personal
Planner. When in standby mode, the standby LED indication will be shown on the front panel.
Note: To reduce power consumption to zero, switch off the receiver using the power switch on the rear panel.
USB
Your digital receiver is equipped with a USB connection at the back panel. The built-in USB controller supports
the USB 2.0 standard.
CONNECTING AN EXTERNAL USB 2.0 MASS-STORAGE DEVICE
(I.E. EXTERNAL USB DRIVE)
When you connect a mass storage class device, the
receiver will automatically show a message for the
initialisation of the device. To unmount a USB device, press
the Library key on the remote control and then use the
“Blue” or “Green” function key to unmount the connected
device.
Mounting mass storage devices allows the following
Recording and Playback features:
Time shift (Pause Live TV)
Record
Playback – of MPEG2/4 recordings, JPEGs and MP3
les
Instant Replay
Notes: - Supported le systems - Fat16, Fat32, Ext2, and
Ext3.
- Format Device requires entering the PIN code
(default ‘1111’).
RECORDING AND PLAYBACK
Time shift
If you are interrupted while watching a TV program, just press the “Pause/Play” key. From this moment, your
programme will be recorded on the external USB hard disk drive. On the screen, you will see a frozen picture,
like the one you have when you press pause on a VCR, as well as the time-shift counter. By pressing the
“Pause/Play” key again, the programme will start again, continuing from where you have stopped.
Recording
You can record the program you are watching or schedule a recording to a future program. While watching a
program - press the “Record” key on your remote control to record the program you are watching. Scheduling a
future recording can be done from either the Program Guide screen or from the Personal Planner screen.
Note: By pressing the “Record” key an endless recording is triggered, but if the Info-banner is displayed, a
recording will be started with start- and end time taken from Info banner.
Note: During recordings, a red dot with the programme name is displayed on the upper part of the TV screen.
This information can be removed from the screen by pressing the “Blue” function key.
Playback
Pressing the Library key on your remote control will bring up the Library screen in which all the recordings
available on your mass-storage device will be listed. You can then select a recoding le for playback. The Library
also lists JPEG and MP3 les so you can playback slide shows and play lists too.
During playback, the Stop, Pause/Play, Fast Forward, Fast Backward, Slow motion and Next/Previous Chapter
keys are used to control and navigate through the different bookmarks of the recordings.
Use the “Green” function key to set a bookmark in a recording you are watching. Use the “Red” function key to
delete a bookmark.
The “Yellow” function key will bring up the Go To dialog that allows you to access the le by inputting the number
of minutes from the beginning of the recording.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inverto IDL 5650m at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inverto IDL 5650m in the language / languages: English, German, French as an attachment in your email.

The manual is 3,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info