510488
23
Zoom out
Zoom in
Previous page
1/144
Next page
En
21
remain unchanged.
Note: If the menu is not displayed clearly or in black and white, after changing the settings, it is because the
Video output mode was changed when you reset the unit to default settings. To correct this problem see chapter
Audio/Video Settings.
Preprogrammed Channel Lists
Use this option to reset your TV channel lists to the
receiver’s preprogrammed default program lists.
SYSTEM INFORMATION
This menu displays information related to the software
and hardware version of the receiver as well as the
option to update the software. This information may be
required if you request service or repair.
PRODUCT INFORMATION
Use this option to display the product information,
such as the software and hardware version. This
information may be required when you call customer
service.
Software update
There are two ways to update the software of the digital receiver:
Over The Antenna (OTA), and through the USB port. In the next chapters you can nd more detailed information
about OTA and USB. From the Settings Menu, select System Information and then Software Update.
SOFTWARE UPDATE VIA ANTENNA (OTA)
If “Auto Upgrades” in the User Preferences is set to “Auto”, the receiver will do this all in the background during
stand by. At the rst start after such an update, the receiver will show you a popup message with the information,
that your receiver got a successful update.
During the OTA software update, the unit will rst search for the update signal.
During the search, a message box “Software update” will be displayed on the TV screen – this process may take
several minutes. To stop this process, press the “Red” function key or “Exit” key. If new software is available,
the user will be informed and asked to conrm the download.
The user will be asked to conrm the download two times, to help prevent accidental changes.
During the download, the “OTA” message will be displayed on the TV screen, showing the progress bar. After all
data has been received, the receiver will update the current software and automatically restart.
All user preferences and channel lists will remain unchanged.
Note: OTA Updates are broadcasted over ASTRA 19.2E satellite and therefore are not available in all the
countries.
SOFTWARE UPDATE VIA USB
The software can be updated using a USB mass storage device.
To update the software using a USB mass storage device, you will require the new software le from our website
and a USB device, such as a USB hard disk or memory stick.
a) Copy the software bin le to the root folder of the USB mass storage device.
b) Turn the receiver on and allow it to boot up.
c) From the Settings Menu, select System Information.
d) Insert the USB mass storage device into the USB slot on the front panel of the receiver.
e) The message “USB – Mounting” will appear at the top of the screen. After it changes to “USB – Init: OK” it is
ok to proceed.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inverto IDL 3290S-CI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inverto IDL 3290S-CI in the language / languages: German as an attachment in your email.

The manual is 3,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info