510488
11
Zoom out
Zoom in
Previous page
1/144
Next page
En
9
BAT T ERIES:
Batteries are required to operate the remote control (supplied with the unit). To insert the batteries, open the
battery compartment cover on the rear of the remote control. Insert the batteries (AAA size, 2 x 1.5V), by
matching the (+) and (-) markings on the batteries to the markings inside the battery compartment. Replace the
compartment cover.
NOTES:
Spent batteries should not be discarded in your domestic refuse. In most countries, you are legally
obliged to ensure spent batteries are properly recycled. They can be disposed of either in special bins
provided in your community, or may be returned to any retailer who sells batteries.
Use the batteries correctly to avoid possible leakage and corrosion. Do not touch the liquid with bare
hands, should leakage occur.
Do not use a new battery with an old battery, or batteries of different manufacturers.
Do not attempt to recharge the supplied batteries
If you do not intend to use the remote for an extended period of time, remove the batteries.
If battery leakage occurs, wipe out any liquid inside the battery compartment and insert new batteries.
USING THE REMOTE CONTROL
For best results, point the remote control directly at the receiver while pressing keys
Do not place the receiver in a location exposed to direct sunlight or bright uorescent lighting, as this
may interfere with the receiver and cause it not to respond to the remote.
Setup
This short instruction explains the most important functions to ensure that you can directly watch
television with your new digital receiver. Please note, additional adjustments may be required.
CONNECTING TO THE ANTENNA
Note: Do not connect the digital receiver to the main power yet.
Connect the LNB (Low Noise Block) to the digital satellite receiver input
Connect the LNB on the satellite dish antenna directly to the digital receiver using the “LNB in” connector of the
Tuner, by means of a coaxial cable. You may use the loop-through connector to connect to a second receiver.
CONNECTION TO THE TV SET
The digital receiver and TV set can be connected by means of a SCART cable (supplied), HDMI cable (supplied),
or Composite Video (Yellow) and Stereo Left/Right Audio cable (Red+White).
Simply connect the two ends of the cable you select to use in connecting the receiver to the TV set. The SCART
connection ensures that audio and video signals are transmitted to the TV set in optimum quality.
In case your TV set is equipped only with a CVBS input socket, you can use the CVBS output on the digital
receiver and connect your TV set via cable to provide optimum quality of the video signal. To provide audio
signal to the TV set it is necessary to connect the Audio L/R output on the digital receiver to the audio input on
your TV set.
The HDMI connection is recommended for Digital TV. In case the TV has a HDMI input connector, a special all-
digital interface that provides the highest picture quality, connect the product to the TV with the HDMI cable.
CONNECTION TO A DVD OR VIDEO RECORDER
Just as the TV set, the DVD or video recorder is connected to the receiver via a SCART connection. Use the
VCR SCART socket for this purpose.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inverto IDL 3290S-CI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inverto IDL 3290S-CI in the language / languages: German as an attachment in your email.

The manual is 3,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info