790021

Inventum VWM9001B Manual

38
Zoom out
Zoom in
Previous page
1/116
Next page
1. Remove the hoses and undo the screws on the back of the washing
machine. Remove the two angular pieces.
2. Slide the angular pieces onto the groove in the blocking rod; before
doing so, rotate the right angular piece to the opposite side.
3. Use the angular pieces to rotate the blocking rods by 90° and pull
them out.
4. Cover the two holes through which the blocking rods were inserted
with plastic plugs, and redo the screws that you undid in step 1.
The plastic plugs are supplied in the bag with the washing machine
instruction manual.
MOVING AND TRANSPORTING AFTER INSTALLATION
i
If you wish to move the washing machine after it has been installed, the angular pieces and at least one blocking rod
have to be re-installed to prevent vibration damage to the washing machine during transport (see previous page). If you lost
the angular pieces and the blocking rods, they can be ordered from the manufacturer.
After transport, the washing machine should be left to stand still for at least two hours before it is connected to the
power mains, so that it can reach room temperature. The appliance should be installed and connected by a trained technician.
Carefully read the instructions for use before connecting the washing machine. Repairs or warranty claims resulting
from incorrect connection or use of the washing machine shall not be covered by the warranty.
REQUIRED SPACE FOR INSTALLING
WARNING!
• Stability is important to prevent the product from moving across the installation site! Make sure to level the appliance
andinstall iton a stable base in longitudinal and traverse direction by screwing the adjustable feet up or down.
• Make sure the appliance is not standing on the power cord.
• Observe the minimum required clearances from the walls as indicated in the figure.
i
The room in which the appliance is placed must meet the following requirements:
1. Dry, level and stable solid base
2. Avoid direct sunlight
3. Sufficient ventilation
4. Room temperature of minimum 5°C and maximum 35°C
5. Keep far away from heat sources such as coal, gas or wood burning appliances.
WASHING MACHINE INSTALLATION CLEARANCES
The washing machine may not be in contact
with a wall or adjacent furniture. For optimum
washing machine operation, we recommend
observing the clearances from the walls as
indicated in the figure.
In case of failure to observe the minimum
required clearances, safe and correct washing
machine operation cannot be ensured.
Moreover, overheating can also occur
(figures1and2).
i
Installing the washing machine under
acountertop is not recommended.
38 • English 1 2
25 mm
25 mm 50 mm
… 38 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inventum VWM9001B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inventum VWM9001B in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1.61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info