790020
51
Zoom out
Zoom in
Previous page
1/116
Next page
English 51
Problem/
error
Indication on the display unit
and problem description What to do?
E9
Water detected at the bottom
ofthewashing machine
(TotalAquaStop system) Turn off the appliance and turn it back on. If the error reoccurs,
callaservicetechnician.
E10
Water level sensor error. Unplug the power cord from the outlet; then, plug the power cord back
into the outlet and switch on the washing machine. If the error reoccurs,
callaservice technician.
E11
Water overflow
If there is water in the drum that exceeds a certain level, and an error is
reported on the display unit, the washing program will be interrupted
and water will be pumped out of the washing machine. Restart the
programme. Ifthe error reoccurs, call a service technician. If there is
water in the drum that exceeds a certain level, and an error is reported
on the display unit, while the washing machine continues to add water,
close the water tap and call a service technician.
E12
Motor control error
Restart the programme. If the error reoccurs, call a service technician.
E22
Error while locking the door. Door is closed, but it cannot be locked. Switch off the washing machine.
Switchit back on and restart the washing programme. If the error
reoccurs, calla service technician.
E23
Error while unlocking the door. Door is closed, but it cannot be unlocked. Turn off the washing machine,
thenturn it back on. If the error reoccurs, call a service technician.
Toopenthedoor, see chapter »INTERRUPTIONS AND CHANGING
THEPROGRAMME/Opening the door manually«.
E36
Electronics communication
failure inthe washing machine Unplug the power cord from the outlet; then, plug the power cord back
intothe outlet and switch on the washing machine. If the error reoccurs,
calla service technician.
E37
Electronics communication
failure inthe washing machine Unplug the power cord from the outlet; then, plug the power cord back
into the outlet and switch on the washing machine. If the error reoccurs,
callaservice technician.
Water drain system alert.
Symbol will appear.
Alert about reduced water flow in the pumping stage. Check the following:
• is the pump filter clean,
• is the discharge hose clogged,
• is the drain clogged,
• if the discharge hose placed is placed below the maximum and above
the minimum height (see chapter »INSTALLATION AND CONNECTION/
Connecting and securing the water discharge hose«).
Unevenly distributed laundry
When the washing programme
is complete, the symbol will
remain lit on the display unit.
Manually distribute the laundry and run the spinning programme.
See additional description under TROUBLESHOOTING TABLE.
cln
System warning to run the Steril
tub (Self-cleaning programme)
After the washing programme
is complete, the signs »cln«
and »End« will alternate on the
display unit.
We recommend running the Steril tub [trommelreiniging]
(Self-cleaning programme).
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inventum VWM9001 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inventum VWM9001 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1.6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info