790020

Inventum VWM9001 Manual

44
Zoom out
Zoom in
Previous page
1/116
Next page
WASHING MODE
NORMAL CARE (basic/default setting)
No button lit.
INTENSIVE [intensief] (This mode will save energy; washing time will be longer,
and water consumption will be lower.)
SHORT [kort] (This mode will save time as programme duration will be shorter,
but it will use more water.)
i
• The light on the button for the selected washing mode is lit.
RPM [toeren] (SPINNING RATE/DRAIN/PUMP STOP)
For changing the spinning rate, only draining, and pump stop. With a preset or
selected spinning rate, the spinning rate number will light up on the display unit.
Ifyou select draining without spinning, the symbol will appear on the display
unit. If you select Pump stop, thesymbol will appear on the display unit.
Select the Pump stop option when you want the laundry to stay soaked in the
water from the last rinse cycle in order to prevent it from creasing when you are unable to take it from the washing machine
immediately after the washing programme is complete. You may set the desired spinning rate. To continue theprogramme,
press the Start/Pause button that is lit. Water will be drained (pumped out) and the final spin cycle will run.
CHILD LOCK (RPM [toeren] and Start Delay [startuitstel])
A safety feature. To activate the child lock, simultaneously press RPM [toeren] and Start Delay [startuitstel] and hold
them for atleast three seconds. The selection will be confirmed by an acoustic signal and by a signal light (the symbol
will be lit). Followthe same procedure to deactivate the child lock. As long as the child lock is activated, programme, settings,
or additional functions cannot be changed.
Child lock remains active even after the washing machine is switched off. For safety reasons, the child lock does not prevent
switching off the washing machine with the On/Off/Reset button. To select a new programme, the child lock must first be
deactivated.
Start Delay [startuitstel]
Use this function to start the washing cycle after a certain amount of time has elapsed. Press Start Delay [startuitstel]
and -:-- will appear on the display. If, for example, you choose a programme with a duration of 2:39, the time will be indicated
on the display unit, and the symbol will be lit under the time.
If the function Start Delay has been selected, the symbol will be lit.
By pressing Start Delay [startuitstel], you can adjust the time in 30-minute steps up to 6 hours, and by 1-hour steps up to
24 hours.
If nothing is pressed for 5 seconds, the actual washing time will be displayed. To set the time to the end of the washing
programme again, press Start Delay.
The function is activated when the Start/Pause button is pressed. The washing machine will count down the set time. When
the countdown reaches zero, the selected washing programme will start automatically.
• To interrupt or change the start delay time, press and hold the On/Off/Reset button. Press Start Delay [startuitstel] to
select anew delay time and confirm it by pressing the Start/Pause button.
• To quickly cancel the start delay, press and hold Start Delay [startuitstel] for 3 seconds. The washing programme will
resume.
• In case of a power supply failure before the delay time has elapsed, press the Start/Pause button to resume the delay
time countdown.
EXTRA WATER [extra water] (HIGH WATER LEVEL)
Use this function to wash with a larger amount of water, and with two additional rinse cycles on some programmes.
8 kg |1400
30° wol
30° extra kort 20 min.
eco 40 - 60
centrifugeren / afpompen
60° allergie
40° overhemden
auto programma
60°
40°
30°
20°
30°
mix 40°
katoen 90°
spoelen +
trommelreiniging
WAVE CARE • INVERTER MOTOR • STEAM CLEAN reset
3 sec.
was
toevoegen
intensief kort extra water
voorwas toeren startuitstel
44 • English
8 kg |1400
30° wol
30° extra kort 20 min.
eco 40 - 60
centrifugeren / afpompen
60° allergie
40° overhemden
auto programma
60°
40°
30°
20°
30°
mix 40°
katoen 90°
spoelen +
trommelreiniging
WAVE CARE • INVERTER MOTOR • STEAM CLEAN reset
3 sec.
was
toevoegen
intensief kort extra water
voorwas toeren startuitstel
… 44 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inventum VWM9001 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inventum VWM9001 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1.6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info