551572
39
Zoom out
Zoom in
Previous page
1/56
Next page
Prior to using the machine for the first time please check whether the electricity and supply water specifications match
the values indicated by the installation instructions for the appliance.
Remove all packaging materials inside the machine.
Fill the salt reservoir and fill up with water until it almost overflows. Set the water hardness setting.
Fill the rinse aid reservoir.
For a good washing result, the dishwasher needs soft, i.e. less calcareous water. Otherwise, white lime residues will remain
on the dishes and the interior of the dishwasher. This has a negative eect on your applinace’s washing, drying and
shining performance. For this purpose, dishwasher salt is used.
• Remove the lower basket and unscrew the cap of the salt reservoir (1 and 2).
• Fill the reservoir before first use with 1 litre of water (3). Place the provided
funnel into the opening and fill with salt till the overflow level (4).
It is normal for a little water to flow out of the opening when doing this.
• Screw the cap back on firmly.
ATTENTION!
• Remove any spilled salt and run a full program to prevent corrosion to the
bottom.
• Refill the salt reservoir when the indicator light of the salt reservoir lights up.
2 | BEFORE FIRST USE
ZOUTRESERVOIR IN DE MACHINE VULLENFILLING THE SALT RESERVOIR
SETTING THE SALT CONSUMPTION
To find out the water hardness level in your area, contact your local water company. Adjust the salt consumption
according to the table on the next page.
Note! Hardness level is adjusted to level 3 as a factory setting.
• Move the program selector knob to the setting (Reset) while the dishwasher is not on (1).
• After setting the program selector knob on (Reset), press the Start/Pause button (2) and keep it pressed down.
• In the meanwhile switch on the dishwasher by pressing the On/Off button (4).
• Keep the Start/Pause button (2) pressed down until the indicator lights turn on and off (with model VVW6026A
SL appears brief in the display).
• After the indicator lights (3) lit up, release the Start/Pause button (2).
The control panel shows the latest entered water hardness setting.
• Set the level of water hardness by pressing the Start/Pause button (2) (with model VVW6026A press the + and -
button). Use the table of water hardness level settings on the next page.
• After adjusting the level of water hardness, press the On/Off button (4) to confirm and store the setting.
Model VVW6022A
Model VVW6024A
Model VVW6026A
39
4
1
2
3
4
1
2
3
4
1
2
3
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inventum VVW6022A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inventum VVW6022A in the language / languages: English, Dutch as an attachment in your email.

The manual is 2,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info