790113
12
Zoom out
Zoom in
Previous page
1/28
Next page
before the first use
3
cleaning and maintenance
5
Before cleaning the fan, you must switch it off by pressing position button 0 and remove the plug from the socket.
Wipe the exterior of the appliance with a slightly damp cloth and dry properly.
If necessary, you can clean the protective guard using a vacuum cleaner (nozzle).
Remove the front protective guard to clean the fan blade. Open the clamps and remove the screw on the bottom side
oftheprotective guard. Clean the fan blade with a slightly damp cloth and a mild detergent if necessary. Make sure no water enters
the motor casing. Properly wipe everything dry and reassemble the fan.
Do not use aggressive or abrasive cleaning agents for cleaning the appliance.
Never submerge the fan in water or any other liquid.
Before using the fan for the first time, proceed as follows: carefully unpack the appliance and remove all packaging material as well as
any promotional stickers.
Keep the packaging (plastic bags and cardboard) out of reach of children.
After unpacking the appliance, carefully check it for external damage that may have occurred during transport.
Place the floor fan on a flat, stable surface. Check that the protective guards are properly fastened.
Insert the plug in a socket.
SWITCHING ON/OFF
Press one of the position buttons 1 to 3 to switch on the fan.
Position 0 = off
Position 1 = lowest position
Position 2 = middle position
Position 3 = highest position
Press position button 0 to switch off the fan.
TILTING
If you want to change the wind to an upward or downward direction, you can tilt the fan head upwards or downwards. Holdthehandle
to move the fan upwards or downwards.
Warning: make sure the fan is switched off when changing the tilt position.
operating the floor fan
4
12 English
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inventum VVM401B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inventum VVM401B in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0.53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info