790115

Inventum VST414C Manual

14
Zoom out
Zoom in
Previous page
1/32
Next page
Before using the fan for the first time, please proceed as follows: carefully unpack the appliance and all components and remove
all packaging material and any promotional stickers. Keep the packaging (plastic bags and cardboard) out of reach of children.
Afterunpacking the appliance, carefully check it for external damage that may have occurred during transport.
Assemble the fan in accordance with the instructions.
1. Each wooden leg of the pedestal has a screw and a wing nut. Use a screwdriver to attach the wooden legs to the pedestal.
Placealong screw through the metal connectors and fasten it with a wing nut. Do the same for all three wooden legs - fig. 1.
2. Connect the metal coupling pieces of the pedestal using a screw and wing nut, thus creating a tripod - fig. 2.
3. Place the motor section on the pedestal and fasten it with the screws, according to the drawings - fig. 3.
4. Remove the four screws from the motor section - fig. 4.
5. Place the rear protective guard on the motor shaft and fasten it with the screws that you have just removed - fig. 4.
6. Place the fan blade on the motor shaft and use a screwdriver to fasten it to the pen with a screw - fig. 5. Test the fan blade
byrotating it by hand. When rotating, the blade should not create any friction with the rear protective guard.
7. Place the front protective guard on the fan and use the clamps to attach it to the rear protective guard.
- Align the front protective guard with the rear protective guard using the positioning clamp [ a ]
on the top side in order to attach both parts to each other properly - fig. 6.
- Use the bolt and nut at the bottom side [ b ] of the guards to attach the guards to each other - fig. 7.
- Press the clamps downwards in order to attach the front and rear protective guards to each other.
Place the fan on a flat, stable surface. Clean the exterior of the fan using a slightly damp cloth and then wipe it with a dry cloth.
Caution: only wipe the wooden parts with a dry cloth.
The fan is ready for use.
assembly instructions
3
fig. 1 fig. 2
fig. 3 fig. 4
fig. 5
a
fig. 6
b
fig. 7
14 • English
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inventum VST414C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inventum VST414C in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3.65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info