694984

Inventum VST401 Manual

11
Zoom out
Zoom in
Previous page
1/28
Next page
assembly instructions
2
Before using the fan for the first time, please proceed as follows: carefully unpack the appliance and all components and remove all
packaging material and any promotional stickers. Keep the packaging (plastic bags and cardboard) out of the reach of children. After
unpacking the appliance, check it for external damage that may have occurred during transport.
Assemble the fan in accordance with the instructions.
In order to make the assembly process more easy, we recommend removing components [ a ] and [ b ] before you start.
1. Start by placing the footplate at the pedestal. Align the pedestal with the groove on the footplate and attach them to one another
with the hook bolt [ b ] .
2. Place the motor section on the pedestal and fasten it with screw [ a ].
3. Place the rear protective guard on the fan.
4. Fasten it by tightening the lock ring.
5. Insert the fan blade onto the fan. Test the fan blade by rotating it by hand. During rotation,
the blade should not create any friction with the lock ring. If it does, remove the fan and repeat all steps from the beginning.
6. Mount the fan blade with the fastening cap. Tighten the fastening cap by turning it to the left - counter-clockwise.
7. Place the front protective guard on the fan and use the clamps to attach it to the rear protective guard.
- Align the front protective guard with the rear protective guard using the positioning clamp [ c ] on the
bottom side in order to attach both parts to each other properly. Use the bolt and nut at the top of the guards to fasten the
guards to each other.
- Press the clamps [ d ] downwards in order to fasten the front and rear protective guards to each other.
4
5
6
7
1
2
3
Protective guard - front
Protective guard - rear
Fan blade
Lock ring
Fastening cap
Motor
Pedestal
Footplate
a
b
d
d
b
d
d
d
c
bolt and nut
English • 11
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inventum VST401 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inventum VST401 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 5,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info