528419
15
Zoom out
Zoom in
Previous page
1/20
Next page
15
• While holding the door in the closed position, reassemble
the top hinge on the left hand side using the three
screws. Do not tighten the screws until the top of the
door is level with the counter top.
• Refit the top panel using the screws.
• Leave the appliance to stand for at least 3 hours before
you insert the plug into the socket.
• Replace the hinge pin into the bottom hinge.
• Replace the front leg.
• Set the freezer carefully upright.
• Remove the handle, if it is already fitted, and place it on
the other side of the door. Don’t forget to also refit the
white screw caps.
• Lower the door onto the bottom hinge pin and hold it.
9 | REMOVING THE TOP PANEL
To install the freezer beneath a counter top for example,
you can easily remove the top panel.
Note: unplug the appliance.
• Remove the screws at the back, holding the top panel to
the appliance.
• Lift the top panel at the backside and remove it.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inventum VR551 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inventum VR551 in the language / languages: English, Dutch as an attachment in your email.

The manual is 2,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info