790031

Inventum VR1680 Manual

25
Zoom out
Zoom in
Previous page
1/56
Next page
troubleshooting
7
Breakdown Cause Solution
The appliance no longer
works
There is an interruption in the
power supply.
- check that the plug is properly inserted in the socket
- check that the power cable is not damaged
- check that there is voltage on the socket by connecting a
different appliance, such as a night lamp
- check that the appliance is on
Temperature in the
freezer is too high or
too low
Wrong setting of the thermostat. - turn the thermostat to a different position
The ambient temperature is
higher or lower than the
temperature indicated in the
table with technical data.
The appliance is intended for operation in an
ambient temperature indicated in the table with technical
data supplied with the appliance.
The appliance is located in direct
sunlight or near a heat source.
Change the location of the appliance according to the
information in the instruction manual.
A too large amount of hot food
has been placed in the appliance
at once.
Wait 72 hours until the products are frozen. The
temperature in the appliance will return to the required
level.
The ventilation at the rear of the
appliance is hindered.
Keep the appliance 10 cm away from the walls, for
sufficient ventilation.
The door of the freezer is opened
too frequently or remains open
for too long.
Open the door less often and/or reduce the time that the
door remains open.
The door is not closed properly. Make sure the foods are placed in such a way that they do
not hinder the door when it is being closed.
The compressor does not work
often enough.
Check that the ambient temperature is not lower than the
range of the climate class.
The door rubber is loose. Fasten the door rubber or have it replaced.
The appliance is working
continuously.
Wrong setting of the thermostat. - turn the thermostat to a higher position
Unusual or loud noises
The appliance is not level and
stable.
Level the appliance with the adjustable feet.
The appliance is standing against
something.
Place the appliance in such a way that it is not standing
against anything.
During normal use of the cooling appliance, different types of noises can occur that do not have any effect on the correct
operation of the freezer.
Noises that can be easily remedied:
• Noise due to the fact that the appliance is not level – position the appliance using the front adjustable feet. If necessary,
place soft material under the rear wheels, particular in case of a tiled floor.
• Friction against other furniture – move the appliance.
• Grinding of drawers or shelves – remove the shelf or drawer and then place it back.
• Noise of colliding bottles – place the bottles apart.
Noises that can be heard during normal use of the appliance are caused by the operation of the thermostat, compressor
(activation), cooling system (shrinkage and expansion of the material under the influence of temperature differences and
flow of cooling liquid).
English • 25
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inventum VR1680 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inventum VR1680 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1.23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info