616185
26
Zoom out
Zoom in
Previous page
1/32
Next page
installation instructions
9
The safety during use can only be guaranteed when the hob is installed correctly and according to the regulations. The installer is
responsible for any damage caused by a faulty installation.
The electrical connection must be made by a qualified electricien. This person is aware of the national and local regulations the
installation must comply with.
The appliance falls under protection class I and can only be used in combination with a grounding conductor connection. The
manufacturer accepts no responsibility for any malfunction or damage caused by incorrect electrical installations.
The appliance must be connected to a fixed installation and the means of disconnecting it from the fixed installation must be
installed according to the installation instructions.
The connection cable must hang freely. Do not tie the power cable or pass it along sharp edges. It must be positioned so that it
does not touch any of the hot parts of the oven.
The connection point, the wall socket and/or plug must always be accessible.
The walls and the worktop surrounding the appliance must be heat resistant up to at least 85°C. Even though the appliance itself
does not get hot, the heat of a hot pan could discolour or deform the wall.
Damage caused by incorrect connection, incorrect use or incorrect fitting is not covered by the guarantee.
Attention: any change to the appliance’s interior, including fitting and changing the power cable, must only be performed by a
qualified electricien.
problems & solutions
8
Problem Solution
The oven lamp is not lit. Replace the oven lamp according to the instructions.
The oven is not heating up. - Has the correct temperature and oven function been set?
- Is the door of the oven closed properly?
The control light of the oven
function is not lit up.
- Is an oven function selected?
- Is the beginning of the cooking time delayed? The oven will not
start until it reaches the set time.
26 English
VFG6012-instructions.indd 26 19-12-2014 13:35:58
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inventum VFG6012 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inventum VFG6012 in the language / languages: English, Dutch as an attachment in your email.

The manual is 3,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info