639703
19
Zoom out
Zoom in
Previous page
1/36
Next page
• Keep oven gloves or oven cloths away from the flame.
• Always raise the cover when using the stove.
Ensure that all burners are switched off and have cooled down
before closing the cover.
• If there is water on the cover, dry it before opening. If you fail to do so,
moisture may enter the cooker.
• Do not use the decorative cover as a cooking surface.
• The appliance should only be connected by a registered installer.
• Faulty parts may only be replaced by original parts. The manufacturer
can only guarantee that original parts meet safety requirements.
• If the connecting cable is damaged, it may only be replaced by the
manufacturer, the manufacturer’s service organisation or equivalently
qualified persons, in order to avoid dangerous situations.
• The appliance should not be connected to the network via a multi-
plug socket or extension lead, as the safe use of the appliance can
then not be guaranteed.
• The appliance must always be earthed.
• The walls and the worktop surrounding the appliance must be heat
resistant up to at least 85°C. Even though the appliance itself does not
get hot, the heat of a hot pan could discolour or deform the wall.
• Failure to maintain the cooker clean could lead to deterioration of
the surface that could adversely affect the life of the appliance and
possible result in a hazardous situation.
• The appliance is not intended to be operated by means of an external
timer or separate remote-control system.
• Before plugging into a socket, check that the voltage in your home
corresponds with the voltage printed on the appliance.
• The safety during use can only be guaranteed when the cooker is
installed correctly and according to the regulations. The installer is
responsible for any damage caused by a faulty installation.
• The gas connection must comply with the national and local safety
regulations. The gas connection must be made by qualified installer.
• The electrical connection must be made by a qualified electricien.
This person is aware of the national and local regulations the
installation must comply with.
• The appliance falls under protection class I and can only be used
in combination with a grounding conductor connection. The
manufacturer accepts no responsibility for any malfunction or
damage caused by incorrect electrical installations.
• The appliance must be connected to a fixed installation and the
means of disconnecting it from the fixed installation must be installed
according to the installation instructions.
English 19
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inventum VFG6010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inventum VFG6010 in the language / languages: English, Dutch as an attachment in your email.

The manual is 2,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info