790011

Inventum VDW9001B Manual

55
Zoom out
Zoom in
Previous page
1/128
Next page
TROUBLESHOOTING TABLE
Problem/error Cause What to do?
The machine
willnotstart.
• The main switch is not
switched on.
• Check whether the main switch is on.
• There is no voltage in the
power outlet.
• Check the fuse.
• Check if the power cord plug is correctly
inserted into the power outlet.
There is voltage
inthe outlet,
butthedrum does
not spin and the
appliance does
notwork.
• Open the door. • Check if the door is closed properly.
• The condensate tank
isfull.
• Empty the condensate tank
(see chapter »CLEANING AND
MAINTENANCE/Emptying the
condensate tank«).
• Perhaps the START
DELAY function was set.
• Programme was not
started in accordance
with the instructions.
• To cancel the start delay, press START
DELAY [startuitstel] and hold for
3seconds.
• Re-read the instructions for use.
The appliance
stops heating
completely during
aprogramme.
• The dryer filter may be
clogged. As a result,
the temperature in the
dryer rises, which in turn
causes overheating,
and therefore heating is
switched off.
• Clean the dryer filter (see CLEANING
AND MAINTENANCE/Cleaning the
dryer filter).
• Wait for the appliance to cool down,
andtry running it again. If the dryer still
fails to start, call the customer service .
A slight hitting noise
appears.
• If the dryer is out of use
for a long period of time,
the support elements are
under stress at the same
point.
• The noise will subside without any
intervention.
The door opens
during drying.
• Excessive load on the
door (too much laundry
in the drum).
• Reduce the amount of laundry.
Unevenly dried
laundry.
• Laundry of varying
types and thickness, or
excessive amount of
laundry.
• Make sure you have sorted the laundry
bytype and thickness, and check that
you have added a suitable amount
of laundry to the drum, and that you
have selected a suitable programme
(seePROGRAMMETABLE).
English • 55
… 55 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inventum VDW9001B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inventum VDW9001B in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2.02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info