790011

Inventum VDW9001B Manual

52
Zoom out
Zoom in
Previous page
1/128
Next page
CLEANING THE HEAT PUMP FILTER
Please clean the heat pump filter at least after every five drying cycles.
Open the outer cover. Hold
the levers on the inside cover
and rotate them upwards.
Removethe inside cover.
Use the handle to pull out
the heat pump filter.
Push the foam part of the
filter from the housing. Use
adamp cloth to clean the
heat pump filter housing.
Wash the foam filter under
running water and dry
itbefore replacing it in
thefilter housing.
Insert the heat pump foam filter into the housing and close the outer cover (push it
upwards toward the machine until it latches into place).
The heat pump filter has to be correctly inserted into its slot. Otherwise, the heat
exchanger installed inside the dryer may be clogged or damaged.
WARNING
• Before cleaning, leave the dryer to cool down.
• Do not damage the heat exchanger! Do not use hard/sharp-edged objects!
• Clean with water only.
• Residual water may leak out, place an absorbent cloth under the maintenance cover.
• Do not operate the dryer without the unitfilters in place!
CLEANING THE HEAT EXCHANGER
We recommend you clean the heat exchanger at least every twelve months.
Do not touch the inner metal parts of the heat exchanger with bare hands. Danger of
injury on sharp parts. Use appropriate protection gloves when cleaning the heat exchanger.
Incorrect cleaning of the metal fins of the heat exchanger can permanently damage
the tumble dryer. Do not press on the metal fins with hard objects like for example the
plastic tube of avacuum cleaner.
The dust and dirt in the metal fins of the heat exchanger can be cleaned with a vacuum
cleaner and asoft brush attachment.
Access to the heat exchanger is possible, when the
heat pump filter is removed as is described in the
chapter »Cleaning the heat pump filter«.
Without pressing, gently move the brush attachment
only in the direction of the metal fins from top to
bottom. Too much pressure can damage or bend the
metal fins of the heat exchanger.
52 • English
… 52 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inventum VDW9001B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inventum VDW9001B in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2.02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info