790012
49
Zoom out
Zoom in
Previous page
1/64
Next page
English 49
POWER SUPPLY FAILURE
When power supply is resumed, the signal light on the Start/Pause
button will flash.
To resume the drying process, press Start/Pause.
END OF THE DRYING PROGRAMME
At the end of the drying programme, »End« will appear on the display unit, and the two red
indicator lights will light up. The Start/Pause button light and Anti Crease time indicator, if
activated or selected, will flash.
1. Open the dryer door.
2. Clean the filter (see the section »MAINTENANCE AND CLEANING«).
3. Take the laundry from the drum.
4. Close the door!
5. Switch off the dryer (press the On/Off button).
6. Empty the condensate tank.
7. Unplug the power cord from the outlet.
After the end of the drying programme, immediately remove the laundry from the dryer to
prevent it from creasing again.
SAVING PERSONAL SETTINGS
Initial settings may be changed.
When the programme and additional functions are selected, you may store such a combination
by pressing the Start/Pause button and holding it for five seconds. An indicator light on the Start/
Pause button and an acoustic signal will confirm your selection. »S C« (settings changed) will be
displayed briefly on the display.
Press the Start/Pause button to start the drying process.
The changed combination will appear every time you switch on the dryer.
Follow the same procedure to change a previously saved combination.
PERSONAL SETTINGS MENU
Switch on the dryer by pressing the On/Off button. To open the personal settings menu,
simultaneously press the positions START DELAY [startuitstel] and ANTI CREASE [anti-
kreuk] and hold them for 3 seconds. The symbols for START DELAY, DRYING TIME, FILTER,
and CONDENSATE TANK will be lit on the display unit. Number 1 will appear on the LED display,
indicating the settings function. Rotate the programme selector knob to the left or to the right
to choose the function to change. Number 1 indicates sound settings and number 2 indicates
resetting of Personal programme settings to factory defaults. If the desired settings are not
selected in 20 seconds, the programme will automatically return to the main menu.
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inventum VDC8001W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inventum VDC8001W in the language / languages: English, Dutch as an attachment in your email.

The manual is 1.07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Inventum VDC8001W

Inventum VDC8001W User Manual - German, French - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info