655012
14
Zoom out
Zoom in
Previous page
1/36
Next page
14 English
before first use
4
Before you use the appliance for the first time, please do
as follows: carefully unpack the appliance and remove all
the packaging material. Keep the material (plastic bags and
cardboard) out of reach of children. Check the appliance after
unpacking for any damage, possible from transportation. Place
the scale on a firm, flat surface. Remove the batteries from the
protective packaging and insert with the correct polarity. See
the diagram inside the battery compartment.
Press the UNIT button on the back of the scale to select the
correct measuring unit (kg/st/lb).
kg = kilograms
lb = pounds
st = stone
Place the scale on a flat and stable surface and wait for the scale
to turn itself off.
Before the first use the scale must be calibrated. This must be
done every time you use the scale on a different spot or when
the batterie is replaced.
Place the scale on a flat and stable surface. With your foot press
on the middle of the glass surface. The full display will show and
when it shows “0.0” the scale is ready for use.
personal data
5
You must enter personal user parameters in order to measure
your body fat percentage and other physical data. The scale has
10 memory positions in which you and other members of your
family can save and retrieve personal settings. Now you can
enter the following setting:
Memory position (P) P0 to P9
Body size 100 to 240 cm/3 ft 3 inch~7 ft 10inch
Age 10 to 80 years
Gender
male (
), female ( )
Sportsman or
-woman
sportman ( ) or sportswoman ( )
For people who exercise regularly.
Press the SET key when the display is switched off to change
the setting.
Press the SET key again to select the correct user, press the
or keys and press the SET key again to confirm.
After you have entered the correct user, the symbol for
gender will blink. To select the gender (male, female,
sportsman, sportswoman), press the
or keys and press
the SET key again to confirm.
After you have entered the gender, the indication for body
size (height) will blink (preset 165 cm). To set your own height
press the
or keys and press the SET key again to
confirm.
After you have entered your body size, the indication for age
will blink (preset 30). To set the correct age (male, female,
sportsman, sportswoman), press the
or keys and press
the SET key again to confirm.
After all parameters have been entered, you can now measure
your weight, body fat and the other data. The display will show
0,0 kg.
Stand on the scale barefoot immediately and let the scale
perform a measuring. When you step on the scale the next time
the scale will recognize you. When you step off the scale, the
scale will switch off after a few seconds.
TIP: To reset a memory position for another user perform the
same steps as described above. All positions are preset.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inventum PW708ZW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inventum PW708ZW in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info