Manual Inventum PW705BG (page 10 of 28) (English, German, Dutch, French)

528423

Zoom out

Zoom in

1/28

2 | INTERESTING FACTS

The measuring principle of the diagnostic scale

This scale determines the body weight, bodyfat, body

water and the percentage of muscle according to the

principle of Bioelectric Impedance Analysis (BIA). With

this process, an imperceptible, completely safe and

harmless current enables the determination of body

tissue proportions within seconds. This measurement

of electrical resistance (impedance) and the inclusion of

constants and/or individual values (age, height, gender)

can be used to determine the percentage of fat, water and

muscle in the body. Muscle tissue and water have good

electrical conductivity, as the fat cells hardly conduct the

current due to their very high resistance.

Weighing correctly

If possible, always weighs yourself at the same time of

day (ideally in the morning), after going to the toilet,

on an empty stomach and without clothes to achieve

comparable results. Minor deviations are normal. When

you drink 1 glass of water for example a dierence of 300

grams can occur. Place the scale on a ﬁrm, ﬂat surface;

a ﬁrm ﬂoor covering is a basic requirement for correct

weight measurement.

Your scale is an accurate instrument. The human body is

the hardest thing to weigh, because it is always in motion.

Therefore a 99% accuracy of the body weight is the

highest possible. Stand on the scale without moving and

with equal weight distribution on both feet!

Do not underestimate the weight of clothing and when

you have just eaten or drunken anything. Only the long-

term trend counts.

5 | WEIGH ONLY

3 | BEFORE FIRST USE

Before you use the appliance for the ﬁrst time, please do

as follows: carefully unpack the appliance and remove

all the packaging material. Keep the material (plastic

bags and cardboard) out of reach of children. Check the

appliance after unpacking for any damage, possible from

transportation. Place the scale on a ﬁrm, ﬂat surface.

Remove the batteries from the protective packaging and

insert with the correct polarity. See the diagram inside the

battery compartment.

Press the UNIT button on the back of the scale to select

the correct measuring unit (kg/st/lb).

kg = kilograms

lb = pounds

st = stone

Place the scale on a ﬂat and stable surface and wait for the

scale to turn itself o.

4 | PERSONAL DATA

You must enter personal user parameters in order to

measure your body fat percentage and other physical data.

The scale has 8 memory positions in which you and other

members of your family can save and retrieve personal

settings.

Now you can enter the following setting:

Memory position (P) 1 to 8

Body size 100 to 220 cm

Age 10 to 80 years

Gender

male (

), female ( )

Sportsman or -woman ,

• Press the SET key when the display is

switched o to change the setting. The

ﬁrst memory position P1 ﬂashes on the

display. To select the correct user, press

the or keys and press the SET key

again to conﬁrm.

• After you have entered the correct user, the symbol for

gender will blink. To select the gender (male, female,

sportsman, sportswoman), press the or keys and

press the SET key again to conﬁrm.

• After you have entered the gender, the indication for

body size (height) will blink (preset 170 cm). To set your

own height press the

or keys and press the SET

key again to conﬁrm.

• After you have entered your body size, the indication

for age will blink (preset 40). To set the correct age

(male, female, sportsman, sportswoman), press the

keys and press the SET key again to conﬁrm.

After all parameters have been entered, you can now

measure your weight, body fat and the other data. The

display will show 0,0 kg.

Stand on the scale barefoot and let the scale perform a

measuring. When you step on the scale the next time the

scale will recognize you. When you step o the scale, the

scale will switch o after a few seconds.

TIP: To reset a memory position for another user perform

the same steps as described above. All positions are preset.

The scale has a step-on function. Step barefoot onto the

scale. Stand still with your weight

distributed evenly on both legs. The scale

will start measuring your weight

immediately and a short time later will

display your weight. When you step o the

scale it will turn o after a few seconds.

6 | BODY ANALYSIS

When you stay on the scale after it displayed your weight,

the scale will automatically perform a body analysis. The

scale can identify users according to the weight.

Important: When using the analysis function, make

sure there is no contact between your feet, legs,

calves or thighs. Otherwise the measurement will not

be performed correctly.

After the weight is stable, the “0” signal moves from left to

right for two times, and then shows the data.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Inventum PW705BG in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,63 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Inventum PW705BG Manual

Product: