Manual Inventum NM010 (page 18 of 44) (English, German, Dutch, French)

704947

Zoom out

Zoom in

1/44

troubleshooting

Problem Cause Solution

Appliance is not functioning;

light does not work

Appliance is not plugged in Plug the appliance in the socket

Temperature inside the

freezer is too high or too low

Thermostat has been set incorrectly Set the thermostat correctly

Air circulation vents are blocked Clean the ventilation openings

Appliance is excessively noisy Has the appliance been installed correctly? Check the installation

Are the pipes at the back touching or vibrating? Check it and move the appliance

forwards

Note: gurgling and hissing noises due to expansion in the refrigerant circuit are normal.

18 • English

It is possible to change the door opening from either the left or the right side. To change the opening direction, please follow these

instructions.

Note: Before reversing the door swing, turn the thermostat off [ � ] and unplug the appliance from the mains. Empty the

appliance, including the shelves before reversing the door opening.

• Remove the screws at the back, holding the top panel to the appliance.

• Lift the top panel and remove it.

• Remove the bolts from the left top side and remove from the right top side the hinge with the bolts (mind the plastic parts

between the hinge and the door).

• Remove the door by carefully lifting it from the bottom hinge. Put the door in a safe place.

• Remove and ﬁt the plastic nog from the right side to the left side.

• Tilt the appliance 45°.

• Unscrew the bolts and remove the bottom hinge. Install the bottom hinge on the opposite side und replace the bolts in the

provided holes.

• Replace the front leg on the right side with the bolts.

• Place the door against the appliance and make sure it is well ﬁtted on the bottom hinge.

• Reﬁt the hinge on the left top side (mind the plastic parts) with the bolts. Make sure the door is alligned with the outside of the

appliance.

• Set the appliance carefully upright.

• Screw the bolts back on the right top side.

• Remove the plastic part from the inside of the top panel and place it on the opposite side.

• Reﬁt the top panel using the screws.

• Leave the appliance to stand for at least 3 hours before you insert the plug into the socket.

reversing the door opening

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Inventum NM010 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,64 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Inventum NM010 Manual

Product: