694951

Inventum NB230 Manual

11
Zoom out
Zoom in
Previous page
1/28
Next page
English • 11
using the blender
4
Before plugging into a socket, check that the voltage in your home corresponds with the voltage printed on the bottom of the
appliance. Place the blender on a flat, clean and dry surface.
1. Insert the plug into a power supply socket.
2. Put all the ingredients in a jug. Note: do not overfill! To avoid spilling, do not add ingredients past the maximum - MAX - fill line.
3. Place the blade assembly onto the jug and twist it on tightly until you have a good seal - figure 1.
Caution: the knives are very sharp.
4. Turn the jug upside down and place it onto the base, aligning the tabs on the jug with the base. Push the jug down and turn it
clockwise, until you feel it click into place - figure 2.
Note: the appliance will not function if the jug is not assembled onto the base properly.
5. Press one of the buttons to activate the blender - figure 3.
6. Ensure the motor has stopped running before removing the jug. Turn the jug counter clockwise - figure 4 - and pull it straight up to
remove - figure 5.
7. Turn the jug upright and remove the blade assembly by twisting the blade assembly counter clockwise. Be sure to store the blade
assembly attached to an empty jug when not in use.
8. Twist the lid with the drinking spout onto the jug to enjoy your drink on the go. Press the flip top cap firmly into the opening to get
the best seal. Ready to go!
9. Make sure the base is unplugged when not in use.
ASSEMBLY USE REMOVE
push
Fig. 1 Fig. 5Fig. 4Fig. 3Fig. 2
START
/
STOP
Press the start stop button to activate the blender. Press the start stop button again to stop the blender.
The blender will stop automatically after 60 seconds when it has not been stopped yet.
AUTO BLEND
When using the button auto blend the blender pulses, blends and stops alternately. When using this function with fresh and softer
ingredients, you will get a soft and smoother result without having to shake the jug. Do you find the consistency of your drink is okay
then switch off the blender by pressing the button auto blend again.
Operation mode: blend for 3 seconds, stop for 2 seconds. In total 10 cycles before the blender stops automatically.
PULSE
The blender will blend as long as you hold down the pulse button. When releasing the button, the blender stops.
START
STOP
AUTO BLEND
PULSE
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inventum NB230 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inventum NB230 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info