616183

Inventum MX301S Manual

12
Zoom out
Zoom in
Previous page
1/28
Next page
The TURBO button can also be used for instant power pulses
without having to set the speed.
Attention: do not activate the stick mixer constantly, this can
cause engine problems. Do not use the stick mixer for more
then one minute continuously, wait until the engine is cooled
down in three minutes before operating it again. Blend larger
quantities in multiples sessions.
The stick mixer can’t exceed a running time of 15 seconds
without a load.
Always unplug the appliance from the supply if it is left
unattended and before assembling, disassembling and during
cleaning.
You can use the stick mixer in the measuring cup and also
in another bowl. When blending directly in a saucepan while
cooking, take the pan from the stove first to protect the
appliance from overheating.
The anti-slip base is also an airtight lid for the measuring cup.
using the whisk
5
Use the whisk for example for making whipped cream or beating
egg whites.
• Take the motor part, the connector and the
whisk.
• Attach the connector to the whisk.
• Attach the whisk to the motor part by turning
the connector clockwise.
• Check whether the speed control is set on the
lowest speed - to the right. You will get the best
result.
• Plug in the appliance.
• Place the ingredients in the measuring cup.
Make sure the measuring cup is not too full.
• Place the whisk in the measuring cup.
• Press the ON button to use the speed setting
you have set on top of the motor part.
• As soon as you release the button (on or turbo),
the whisk will stop.
Always unplug the appliance from the supply
if it is left unattended and before assembling,
disassembling and during cleaning.
To remove the whisk after use, turn it anti
clockwise from the motor part and pull the whisk
from the connector.
using the chopper
6
Warning: the blades of the chopper are extremely
sharp. Be careful while assembling, emptying the
chopper bowl and cleaning.
The chopper is suited for chopping meat, cheese, onions, herbs,
garlic, carrots, nuts, etc.
Attention: do not chop any hard ingredients such as ice cubes.
• Place the chopper bowl on a flat surface.
• Place the knife on the axle in the centre of the bowl. Pay
attention - the knives are extremely sharp.
• Place the ingredients in the bowl.
• Place the lid.
• Take the motor part and attach it by turning it clockwise onto
the lid of the chopper.
• Check whether the speed control is set on the lowest speed -
to the right.
• Plug in the appliance.
• Press the TURBO button for maximum speed or press the
ON button to use the speed setting you can set on top of the
motor part.
• During processing, hold the motor part with one hand and the
chopper bowl with the other hand.
Attention: do not activate the chopper constantly, this can
cause engine problems. Do not use the chopper for more
then one minute continuously, wait two minutes before you
operate it again.
• As soon as you release the button (on or turbo), the chopper
will stop. Wait until the knife stops rotating before you take
the lid of.
The TURBO button can also be used for instant power pulses
without having to set the speed.
Always unplug the appliance from the supply if it is left
unattended and before assembling, disassembling and during
cleaning.
To remove the motor part after use, turn it anti clockwise from
the lid.
The anti-slip base is also an airtight lid for the chopper.
12 • English
MX301S-instructions.indd 12 15-12-2014 12:25:27
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inventum MX301S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inventum MX301S in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info