694962

Inventum MX201S Manual

11
Zoom out
Zoom in
Previous page
1/24
Next page
using the whisk
5
Use the whisk for example for making whipped cream or beating egg whites.
• Take the motor part, the connector and the whisk.
• Attach the connector to the whisk.
• Attach the whisk to the motor part by turning the connector clockwise.
• Plug in the appliance.
• Place the ingredients in the measuring cup. Make sure the measuring cup is not too full.
• Place the whisk in the measuring cup.
• Press the on/off button for setting 1.
• As soon as you release the button, the whisk will stop.
Always unplug the appliance from the supply if it is left unattended and before assembling,
disassembling and during cleaning.
To remove the whisk after use, turn it anti clockwise from the motor part and pull the whisk
from the connector.
cleaning & maintenance
6
Always unplug the appliance from the supply if it is left unattended and before assembling, disassembling and during cleaning.
Disassemble the motor part from the accessory.
• Wipe the motor part and the connector with a damp cloth.
• Rinse the measuring cup, the lid and the blender shaft with water or clean them in the dishwasher.
• Do not use any abrasive or strong detergents. These can damage the housing.
• Never place the motor part, the power cable or the plug in water or any other liquid.
• These accessories are dishwasher proof:
- blender shaft
- measuring cup with anti-slip base/lid
- whisk without the connector
Be careful when cleaning the accessories by hand. The knives of the blender shaft are extremely sharp.
using the stick mixer
4
Warning: the blades of the blender shaft are extremely sharp.
• Take the motor part and the blender shaft. Attach the blender shaft to the motor part by
turning the blender shaft clockwise. To loosen it, turn the blender shaft the other way.
• Plug in the appliance.
• Lower the stick mixer into the food.
• Press the on/off button for setting 1 or 2.
• As soon as you release the button, the stick mixer will stop.
• When you have finished mixing or blending and released the button, wait until the knives have
stopped turning, before approaching the blender shaft with your hands.
Attention: do not activate the stick mixer constantly, this can cause engine problems. Do not
use the stick mixer for more then one minute continuously, wait until the engine is cooled down in
three minutes before operating it again. Blend larger quantities in multiple sessions.
The stick mixer can’t exceed a running time of 15 seconds without a load.
Always unplug the appliance from the supply if it is left unattended and before assembling, disassembling and during cleaning.
You can use the stick mixer in the measuring cup and also in another bowl. When blending directly in a saucepan while cooking, take
the pan from the stove first to protect the appliance from overheating.
The anti-slip base is also an airtight lid for the measuring cup.
English • 11
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inventum MX201S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inventum MX201S in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info