Manual Inventum MT60 (page 37 of 44) (English, German, Dutch, French)

55013

Zoom out

Zoom in

1/44

Saving the temperatures measured

The temperature last measured, i.e. only the last temperature of a series measured, is saved automatically as soon as the thermometer is

switched off. There are 9 memory locations available for this.

You can call up the last temperature measured with the “ “ button. The date and time are also shown. The LED dous not support any requests

for stored measured values. If you continue to hold down the “ “ button, you will enter a special measuring mode, in which the thermometer

will not make a correct measurement. In this event, allow the thermometer to switch off automatically after about 1 minute and then switch on

again.

Surface temperatures

When you want to measure surface temperatures with this infrared thermometer, you must change to the “SCAN“ mode. With the thermometer

switched on (standard forehead thermometer mode) keep ther “ “ button depressed and at the same time press the “SCAN“ button. This

mode is indicated with the symbol. If you keep the “SCAN“ button depressed, the surface temperature measured is continiously displayed.

You can apply the sensor tip directly to the surface to be measured or measure at close range (do not immerse in liquids). Note that the

temperature displayed is the surface temperature measured but not adjusted. It cannot be compared with the forehead temperature.

Ambient temperature

After the measurement, the thermometer automatically switches to standby mode after about 1 minute, but only if the time has been set. This

mode is identified by the symbol and the ambient temperature is shown continuously. If you want to use the thermometer to measure the

ambient temperature, it should be positioned so that the measurement is not influenced by solar radiation or other influences such as cold

draughts from air-conditioning systems. In addition to the ambient temperature, which is updated once every minute, the date and time are

displayed alternately.

Changing the temperature unit

You can display the temperature in degrees Celsius (°C) or degrees Fahrenheit (°F). With the thermometer switched off or in standby mode, select

the unit by holding down the “SCAN“ button and at the same time pressing the “ “ button. Keep the two buttons depressed until the

temperature unit changes. All stored temperatures are displayed in the temperature unit.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Inventum MT60 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,19 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Inventum MT60 Manual

Product: