Manual Inventum MC60 (page 38 of 44) (English, German, Dutch, French)

54975

Zoom out

Zoom in

1/44

You have the best equipment with the MC 60 instrument and the

MCA 60 professional set attachments. This can otherwise be offered

only by a professional chiropodist.

General

• This instrument is intended only for the treatment of hands

(manicure) and feet (pedicure).

• Select an attachment and push it onto the instrument spindle using

a slight pressure. The attachments can be heard to engage. To

remove: pull the attachment and instrument apart in the axial

direction (straight).

• Switch on the instrument by sliding the slide switch to the left

(anticlockwise running) or to the right (clockwise running). The two

buttons marked with plus (+) and minus (-) allow you to select the

speed of rotation. Start every application at low speed and increase

it only as required.

• All file and cutting attachments are coated with a sapphire grain.

This guarantees extremely long life and almost guarantees freedom

from wear.

• Do not exert heavy pressure and always guide the attachments

carefully over the surface to be treated.

• Move the instrument under light pressure in circular movements

slowly over the parts to be treated.

• Note that the cutting attachments will have a reduced effect if the

skin is softened or moist. For this reason, do not carry out any

pretreatment in a bath.

• Do not remove all the callus skin in order to retain the natural

protection of the skin.

• Always ensure that the spindle can rotate freely. It must never be

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Inventum MC60 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,36 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Inventum MC60 Manual

Product: