704940
36
Zoom out
Zoom in
Previous page
1/44
Next page
36 English
A
B
C
D
1
2
3
1
2
3
REMOVING AND REPLACING THE OVEN DOOR
The oven door can be removed in order to obtain easier access to the oven chamber for cleaning.
Open the oven door and tilt the safety catch part of the hinge upwards (fig. A). Close the door a little and lift it up and pull it out
towards you in order to remove the door.
To replace the door, reverse the process. When fitting, ensure that the notch of the hinge is correctly placed on the protrusion of
the hinge holder. After the door is fitted to the oven, the safety catch should be carefully lowered down again. If the safety catch is
not set it may cause damage to the hinge when closing the door.
REMOVING AND REPLACING THE INNER GLASS PANEL
To clean the oven door properly, the inner glass panel can be removed.
Using a flat screwdriver unhook the upper door slat, prying it gently on the sides (fig. B).
Pull the upper door slat loose (fig.B, C).
Carefully pull the inner glass panel from its seat (in the lower section of the door) fig. D.
Clean the panel with warm water with some washing-up liquid added.
Carry out the same in the reverse order to reassemble the inner glass panel. Its smooth surface must be pointed upwards.
Important! Do not force the upper strip in on both sides of the door at the same time. In order to correctly fit the top door strip, first
put the left end of the strip on the door and then press the right end in until you hear a “click”. Then press the left end in until you
hear a “click”.
ACCESSORIES
Clean the accessories, such as the baking tray and the grid with warm water and a mild detergent. Dry thoroughly before reusing.
REPLACING THE OVEN LIGHT BULB
In order to avoid the possibility of an electric shock ensure that the appliance is switched off and unplugged
before replacing the bulb.
Unscrew and wash the lamp cover and then wipe it.
Replace the light bulb with a new equal bulb (25 W, 230V, E14 connection and must be resistant to high
temperatures - upto 300°C).
Refit the lamp cover.
Plug the appliance in.
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inventum LK010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inventum LK010 in the language / languages: English, Dutch as an attachment in your email.

The manual is 4,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Inventum LK010

Inventum LK010 User Manual - German, French - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info