663647
19
Zoom out
Zoom in
Previous page
1/24
Next page
reversing the door opening
8
fig. 1
fig. 2fig. 2
fig. 3
It is possible to change the door opening from either the left or the right side. To change the opening direction, please follow these
instructions. We recommend you have someone assist you.
Note: Before reversing the door swing, set the thermostat off and unplug the
appliance from the mains. Empty the appliance, including the shelves before
reversing the door opening.
Remove the plastic covering from the top door hinge - fig.1.
Remove from the right top side the hinge with the three bolts (mind the plastic
parts between the hinge and the door). - fig.2. Remove two bolts from the left
top side.
Remove the top door by carefully lifting it from the hinge in the middle. Put the
door in a safe place - fig. 3.
Remove the hinge in the middle on the right side by losening the two bolts.
Remove and fit the white plastic caps from the left side to the right side and
place these where you have removed the middle hinge - fig. 4.
Carefully remove the bottom door by lifting it from the bottom hinge- fig. 5. Put
the door in a safe place.
Remove and fit the plastic nog from the right side to the left side.
Tilt the appliance 45°.
Remove the front leg on the left side and the two bolts.
Unscrew the two bolts and remove the bottom hinge - fig. 6. Install the bottom
hinge on the opposite side und replace the bolts in the provided holes.
Replace the front leg on the right side with the bolts.
Place the bottom door against the appliance and make sure it is well fitted on the
bottom hinge. Make sure the door is alligned with the outside of the appliance.
Refit the middle hinge (mind the plastic parts) with the bolts - fig. 7. Make sure
the door is alligned with the outside of the appliance.
Place the top door against the appliance and make sure it is well fitted on the
middle hinge. Make sure the door is alligned with the outside of the appliance.
Refit the hinge on the left top side (mind the plastic parts) with the bolts - fig. 8.
Make sure the door is alligned with the outside of the appliance.
Set the appliance carefully upright.
Screw the bolts back on the right top side.
Refit the plastic covering on the top hinge.
Leave the appliance to stand for at least 3 hours before you insert the plug into
the socket.
unscrew
fig. 4
fig. 5
fig. 6
Middle hinge
fig. 7
fig. 8
English 19
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inventum KV1800S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inventum KV1800S in the language / languages: English, Dutch as an attachment in your email.

The manual is 1,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info