663653
22
Zoom out
Zoom in
Previous page
1/28
Next page
reversing the door opening
8
22 English
It is possible to change the door opening from either the left or the right side. To change the opening direction, please follow these
instructions. We recommend you have someone assist you.
Note: Before reversing the door swing, set the thermostat OFF and unplug the appliance from the mains. Empty the appliance,
including the shelves before reversing the door opening.
KV1380 + KV1530
These models have a top panel which needs to be removed first:
Remove the two screws at the back, holding the top panel of the appliance to loosen it.
Remove the top panel and put it in a safe place.
KV1430 + KV1770
These models do not have a top panel, but a plastic covering which needs to be removed first:
Remove the plastic covering from the top door hinge.
The following instructions are for all the models:
Remove two bolts from the left top side and remove from the right top side the hinge with the three bolts (mind the plastic parts
between the hinge and the door).
Remove the top door by carefully lifting it from the hinge in the middle. Put the door in a safe place.
Remove the hinge in the middle on the right side by losening the two bolts. Remove and fit the white plastic caps from the left side
to the right side and place these where you have removed the middle hinge.
Carefully remove the bottom door by lifting it from the bottom hinge. Put the door in a safe place.
Remove and fit the plastic nog from the right side to the left side.
Tilt the appliance 45°.
Remove the front leg on the left side and the two bolts.
Unscrew the two bolts and remove the bottom hinge. Install the bottom hinge on the opposite side und replace the bolts in the
provided holes.
Replace the front leg on the right side with the bolts.
Place the bottom door against the appliance and make sure it is well fitted on the bottom hinge. Make sure the door is alligned with
the outside of the appliance.
Refit the middle hinge (mind the plastic parts) with the bolts. Make sure the door is alligned with the outside of the appliance.
Place the top door against the appliance and make sure it is well fitted on the middle hinge. Make sure the door is alligned with the
outside of the appliance.
Refit the hinge on the left top side (mind the plastic parts) with the bolts. Make sure the door is alligned with the outside of the
appliance.
Set the appliance carefully upright.
Screw the bolts back on the right top side.
KV1380 + KV1530
These models have a top panel which needs to be placed back:
Remove the plastic plate from the inside of the top panel and refit it on the other side.
Place the top panel and fasten the screws at the back.
KV1430 + KV1770
These models do not have a top panel, but a plastic covering which needs to be placed back:
Refit the plastic covering on the top hinge.
Leave the appliance to stand for at least 3 hours before you insert the plug into the socket.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inventum KV1770 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inventum KV1770 in the language / languages: English, Dutch as an attachment in your email.

The manual is 0,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info