Manual Inventum KP521 (page 7 of 16) (English, German, Dutch, French)

551631

Zoom out

Zoom in

1/16

Before you use the appliance for the ﬁrst time, please do

as follows: Carefully unpack the appliance and remove

all the packaging material. Keep the material (plastic

bags and cardboard) out of reach of children. Check the

appliance after unpacking for any damage, possible from

transportation. Place the appliance on a stable and heat

resistant surface. Clean the appliance with a damp cloth.

The hotplate(s) has (have) a protective layer which should

be removed before the ﬁrst use. Switch the hot plate

on for about 5 to 6 minutes on the maximum position.

There can be a slight development of smoke from the

protective layer which is now burning of. After removing

the protective layer you can now switch the hot plate of or

begin using it.

2 | BEFORE FIRST USE

4 | CLEANING & MAINTENANCE

• If the appliance is used for other purposes than intended,

or is it not handled in accordance with the instruction

manual, the full responsibility for any consequences will

rest with the user. Any damages to the product or other

things are not covered by the warranty.

3 | OPERATION

The thermostat button is adjustable:

OFF = o

MIN = low

MAX = high

Make sure the thermostat button is set to position «OFF»

before you switch on the appliance. Plug the appliance

into a socket.

For heating the hot plate(s) turn the knob clockwise. The

red control light will burn. Position «MIN» is the lowest

position and position «MAX» is the highest position. It

takes about 10 minutes before the hot plate has reached

the maximum temperature (on the maximum position of

the thermostat knob). If the temperature is reached which

conforms to the set position, the control light will go out.

After a temperature drop, giving of heat to the pan, the

thermostat and the control light will switch on.

ATTENTION: THE APPLIANCE CAN GET HOT DURING USE.

THEREFORE ALWAYS PLACE THE APPLIANCE ON A HEAT

RESISTANT SURFACE AND NEVER ON A PLASTIC TABLE

OR PLASTIC TABLE CLOTH.

Use only pots with a bottom which has the same cross-cut

as the hot plate. A smaller cross-cut will lead to energy

loss. Model KP511 has a cast iron plate with a cross-cut of

185 mm. Model KP521 has a cast iron plate with a cross-

cut of 185 mm and a cast iron plate with a cross-cut of

155 mm.

Do not touch the hot plate when in use. Be careful: the

hot plates need time to cool down after switching the

appliance of. Always unplug the hot plate after every use.

Let the appliance cool o and always unplug the appliance

before cleaning. Wipe the outside of the appliance with a

damp cloth and dry the kettle afterwards. Never use any

abrasives! Be aware of the fact that the appliance needs

time to cool down after switching of. Never immerse the

appliance in water or others liquids.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Inventum KP521 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,54 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Inventum KP521 Manual

Product: