694841

Inventum KO931 B Manual

14
Zoom out
Zoom in
Previous page
1/32
Next page
cleaning and maintenance
5
Before cleaning the radiator, switch it off and remove the plug from the socket. Always allow the radiator to cool down fully,
before cleaning or storing it. Regularly clean the radiator. At least once per seasonal use.
• Clean the outside of the appliance only by means of a lightly damp cloth.
• Do not use aggressive or abrasive cleaning agents for cleaning the appliance.
• Prevent scratches in the paint. This could cause rust.
• Never submerge the radiator in water or any other liquid.
• Store the radiator on a cool and dry location.
SWITCHING THE RADIATOR ON AND OFF
Insert the plug in the socket and turn the thermostat button to the maximum temperature
. Turn the position button to
position I, II or III to switch on the radiator.
To heat a room quickly, it is recommended to use the highest position III. Once the room has reached the required temperature,
the radiator can be set to a lower position to reduce energy consumption and prevent the room from getting too hot.
Turn the position button to 0 to switch off the heater and remove the plug from the socket. It takes a while for the radiator to
cool down, because the oil in the radiator is hot.
The radiator has a thermostat to regulate temperature and keep a room at room temperature.
Turn the thermostat button to the maximum position
and turn the position button to position III to switch on the radiator.
Once the required temperature is reached, slowly turn back the thermostat button towards the minimum position until
you hear a click sound. The radiator switches off. The radiator will now switch on and off automatically to maintain the set
room temperature.
Overheating protection
When the radiator gets too hot due to ambient temperature or extended use, the radiator switches off automatically.
Allowthe radiator to cool down before you switch it on again.
MOVING THE RADIATOR
Switch off the radiator, remove the plug from the socket and allow the radiator to cool down before moving it.
Carefullymove the radiator so that the swivel castors are able to roll properly.
using the radiator
4
breakdowns and solutions
6
First check the following if your heater is not working.
• Check the fuses in the meter cupboard.
• Check that the plug is properly inserted in the socket and that the socket receives power.
• Keep the heater clean. Dust, dirt and/or contamination on the radiator are a common cause for overheating.
Make sure that such contamination is removed regularly.
• If the radiator suddenly stops during heating, it is possible that the overheat protection is switched on. Switch off the
radiator, remove the plug from the socket and allow the radiator to cool down. Switch on the heater according to the
instructions, after it has cooled down.
technical data
7
Type number KO931B
Voltage 220-240V, 50Hz
Power position I = 800 watts, position II = 1200 watts, position III = 2000 watts
14 • English
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inventum KO931 B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inventum KO931 B in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info