694932
10
Zoom out
Zoom in
Previous page
1/24
Next page
using the coffee grinder
4
Before plugging into a socket, check that the voltage in your home corresponds with the voltage printed on the bottom of the
appliance. Place the coffee gronder on a flat, clean and dry surface.
1. Insert the plug into a power supply socket.
2. Take the container [3] out of the appliance. Fill the container with coffeebeans, maximum 50 grams or up to the maximum
indication. Note: do not overfill!
3. Check whether the base is clean [6] before use.
4. Place the container onto the base.
5. Place the lid [2] on the container and make sure the on/ off switch [1] is alligned with the safety switch [5].
Note: the appliance will not function if the container and lid are not assembled onto the base properly.
6. Press the on/ off switch to activate the coffee grinder. It takes about 30 seconds to grind the coffee beans.
Note: Do not activate the coffee grinder continuously, this can cause engine problems. Do not use the coffee grinder for more then
30 seconds continuously, wait 1 minute before you operate it again.
7. Before taking the container out after grinding, tap the lid softly to release the coffee powder that is stuck on the lid into the
container.
8. Take the container out of the base to empty it.
9. Make sure the base is unplugged when not in use.
The coffee grinder can also be used for grinding dry herbs and spices. Grind a maximum of 50 grams dry herbs or fill the container up
to the maximum indication. Note: do not overfill the container.
cleaning & maintenance
5
Always unplug the cord from the socket before cleaning the appliance.
Rinse the container and the lid after every use under running water. These parts may also be cleaned with warm soapy water.
Wipe the base with a damp cloth. Do not use any abrasive or strong detergents.
Dry all the accessories thoroughly and reassemble them again.
Never place the appliance, the power cable or the plug in water or any other liquid.
Attention: the blade assembly is extremely sharp. Clean the blade sets as a whole do not try to take them apart. Attention: do not
use any abrasive or strong detergents.
Zorg dat er geen restanten van koffiebonen achterblijven in en op de basis. Maak dit na elk gebruik schoon.
Achtergebleven resten kunnen ervoor zorgen dat de maalbeker niet goed in de basis valt. Het apparaat zal in dit geval mogelijk niet
werken.
FAQ
The appliance is not working anymore.
- Clean the container area of the motor unit. If there is dirt in this area the appliance will probably not work.
- Properly place the container in the motor unit. The appliance will probably not work if the container is not placed properly..
10 English
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inventum KM615 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inventum KM615 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info