Manual Inventum KK601 (page 12 of 20) (English, Dutch)

528416

Zoom out

Zoom in

1/20

Before you use the appliance for the ﬁrst time, please do as

follows: Carefully unpack the appliance and remove all the

packaging material. Keep the material (plastic, polystyrene

and cardboard) out of reach of children. Check the

appliance after unpacking for any damage, possible from

transportation. Place the appliance on a ﬂat and stable

surface. Make sure there is enough open space around the

appliance for the intake and/or outlet vents. A minimum

clearance of 10 cm is required between the appliance and

any adjacent walls. The larder needs good ventilation for

easy dissipation of heat, high eciency of refrigeration and

low power consumption.

You can level the appliance using the adjustable feet.

Do not place the appliance near a heat source such as a

heater or furnace.

Mount the enclosed handle on the desired side of the door

with the enclosed screws and place the enclosed caps on

the other side for a nice ﬁnish. Attention: never lift the

larder by the handle.

Leave the appliance to stand for at least 3 hours before

you insert the plug into the socket.

First clean the interior of the appliance. Use warm water

and a neutral detergent. After cleaning, rinse the interior

with clean water and rub dry. Leave the appliance to dry

for 1 to 2 hours.

The appliance features internal

controls. Set the thermostat on

setting 3. Check that the voltage in

your home corresponds with the voltage printed on the

back of the appliance and plug it in a socket. The appliance

now cools continuously until the set temperature has

been reached. Do not place anything in the larder until the

set temperature is reached. This usually takes 2 or 3 hours.

Then set the thermostat at the desired setting and place

food into the larder.

2 | BEFORE FIRST USE

3 | USING THE LARDER

Always ensure that your hands are dry before handling

the plug or power cord.

• Should you decide not to use the appliance anymore,

make it inoperative by cutting the power cord after

removing the plug from the socket. We also recommend

making all potentially dangerous parts of the appliance

harmless, particularly for children who might be tempted

to play with it.

• Never immerse any part of the main body, lid, power

cord and plug in water or any other liquid to protect

against electrical hazards.

• If the appliance is used for other purposes than intended,

or is it not handled in accordance with the instruction

manual, the full responsibility for any consequences will

rest with the user. Any damages to the product or other

things are not covered by the warranty.

Setting 1 = lowest cooling setting (highest temperature)

Setting 7 = higest cooling setting (lowest temperature)

In general setting 3 or 4 is used for the refrigeration.

The light on the inside will now light up every time you

open the door.

Note:

The ambient air temperature, how often the door is

opened and the position of the appliance can aect the

internal temperature. These factors must be taken into

account when setting the thermostat.

• Do not put hot food into the larder.

• Never introduce volatile, inﬂammable or explosive ﬂuids

such as alcohol, acetone or petrol because of the risk of

explosion.

• It is advisable to wrap meat and ﬁsh to avoid odours.

• Leave sucient space between the food to enable air to

circulate correctly between them. Similarly, when storing

them, avoid puttin food items in contact with eacht

other.

• Do not place food items in contact with the cold wall

at the back of the larder. The shelves have a stop to

avoid this.

• The door should not be left open any longer than

necessary.

• High ambient temperatures have a negative eect on

energy use. Keep the larder in a position away from

direct sunlight or other sources of heat.

• Keep ventilation openings free. Clogged openings lead to

higher use of energy.

• Try not to open the door too often, especially when the

weather is wet and hot. Once you open the door, mind

to close it as soon as possible.

• The space between the shelves and the rear wall of the

larder compartment must be unobstructed to allow

the cool air to circulate. Therefore don’t place any food

items against the back.

• Turn the thermostat to a lower setting when the

circumstances allow it.

• Before storing fresh cooked food, make sure the food has

cooled at least to room temperature.

• If the gasket is damaged or if it turns out that the sealing

is poor, the energy consumption is substantially higher.

To restore eciency, replace the gasket.

• Keep the condensor on the rear wall always clean, free of

dust or any impurities.

• Always consider the instructions, otherwise the

energyconsumption is substantially higher.

4 | TIPS

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Inventum KK601 in the language / languages: English, Dutch as an attachment in your email.

The manual is 2,3 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Inventum KK601 Manual

Product: