695000

Inventum KK1420 Manual

24
Zoom out
Zoom in
Previous page
1/56
Next page
cleaning & maintenance
6
CLEANING THE LARDER
Frost settles on the rear wall of the cooling compartment. It is removed automatically. During the defrosting, the condensate,
which can contain contaminants may clog the water discharge opening. Should it occur, carefully unclog the water discharge
opening with the cleaning plug.
• Turn the thermostat off [OFF] and unplug the appliance.
• Open the door and remove the food. Keep the contents of the larder in a cool place and wrapped in blankets or newspapers.
• Clean the interior of the appliance. Use warm water and a neutral detergent to prevent any bad smells occurring. After cleaning,
rinse the interior with clean water and rub dry.
• Leave the appliance to dry for 1 to 2 hours. Simply remove the drawers, the glass shelves and the door compartments to clean
them by hand. Do not clean the interior accessories in the dishwasher.
• Clean the outside of the appliance and the gasket with a soft moist cloth.
• Switch the thermostat on to the right setting. When the larder reaches its correct temperature, replace the food items.
For areas that are difficult to clean in the larder, such as narrow gaps or corners, it is recommended to wipe them regularly with a
soft rag, soft brush, etc. When necessary use some auxiliary tools, such as thin sticks (tooth picks), to ensure no contamination
can accumulate in these areas.
Clean the outside of the larder and the door gasket with mild soap and water. Use a soft moist cloth.
We recommend that you dust the back of the appliance and on the floor with a cloth or vacuum cleaner once a year in order to
maintain a good output and low energy consumption.
Do not use hard brushes, cleaning steel wire balls, wire brushes, abrasives, such as toothpastes, organic solvents (such as alcohol,
acetone, oils, etc.), boiling water, acid or alkaline items to clean the larder considering that this may damage the fridge surface and
interior. Boiling water and benzene may deform or damage plastic parts.
REPLACING THE LED LIGHTING
This appliance is equipped with a LED light bulb. It can be used for a long time. In case, the LED bulb is blown, you can replace it
yourself.
troubleshooting
7
Problem Cause Solution
Appliance is not functioning;
light does not work
Appliance is not plugged in Plug the appliance in the socket
Temperature inside the
larder is too high or too low
Thermostat has been set incorrectly Set the thermostat correctly
Air circulation vents are blocked Clean the ventilation openings
Appliance is excessively noisy Has the appliance been installed correctly? Check the installation
Are the pipes at the back touching or vibrating? Check it and move the appliance
forwards
Note: gurgling and hissing noises due to expansion in the refrigerant circuit are normal.
Note: please store different foods according to the compartments or target storage temperature of your purchased products.
- If the refrigerating appliance is left empty for long periods, switch off, defrost, clean, dry, and leave the door open to prevent
mould developing within the appliance.
WARNING -Food needs to be packed in bags before putting into the refrigerator, and liquids need to be packed in bottles or
capped containers to avoid the problem that the product design structure is not easy to clean.
24 • English
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inventum KK1420 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inventum KK1420 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info