704942

Inventum JB010 Manual

28
Zoom out
Zoom in
Previous page
1/64
Next page
resolving failures yourself
9
Breakdown Solution
Appliance does not do anything Check that the plug is properly inserted in the socket.
Check if there has been a power failure in the house.
Check the plug.
Check the fuse in the group box.
Check that the voltage in the house system corresponds with the voltage required
for the appliance.
Check the socket. Insert the plug in a different socket of which you are certain
thatit works.
Temperature in the refrigerator
isnot cold enough
Check that the refrigerator is not overfilled.
Check that the interior temperature corresponds with the set temperature.
Is the appliance located in direct sunlight or near a heat source?
Check that the ambient temperature corresponds with the climate class
oftheappliance.
Are the doors of the appliance opened regularly? As a result of the air humidity in the
surrounding area, a lot of humidity may accumulate in the appliance when the doors
are opened frequently.
Temperature in the refrigerator
is too cold
Increase the temperature of the appliance.
The lowest temperature should only be used for quick freeze and should preferably
be set 2 hours before food is placed in the appliance. If not, it is possible that
the temperature of the appliance gets below 0°C, because the compressor is
continuously active.
The surfaces on the inside
arewet
This is caused by condensation - dry the interior of the appliance.
The exterior of the appliance
is wet.
This is caused by condensation - dry the exterior of the appliance.
Each time the door of the cooler or freezer section is opened, a noise sounds to indicate that the appliance is working.
If the door is open for too long (more than 2 seconds), an alarm is activated to indicate that the door should be locked to
maintain the temperature in the refrigerator.
In case of a power failure, all settings are saved. Once the refrigerator receives power again, it will function with the
previously selected settings.
The following error messages may occur on the display. In such a case, contact customer service.
Error
message
Description Error
message
Description
E1 Problem with the temperature in the cooler
section
E6 Communication failure
E2 Problem with the temperature in the
freezer section
E7 Breakdown in the ambient temperature
sensor
E4 Breakdown of the automatic cooler sensor EH Breakdown in the humidity sensor
E5 Breakdown of the automatic defrost
sensor
error messages
8
28 • English
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inventum JB010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inventum JB010 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 13,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info