704942

Inventum JB010 Manual

24
Zoom out
Zoom in
Previous page
1/64
Next page
use
4
The control unit of the appliance is located on the outside. Check that the voltage corresponds with what is stated
ontheinformation plate and insert the plug in the socket.
Important: the operating panel will only light up when a key is pressed or one of the doors is opened. The rest of the time
the operating panel will be standby and not light up.
Important: the operating panel locks automatically -
. In order to change the temperature or a function, press the key
lock for 3 seconds until the lock disappears from the operating panel.
Instruction: the recommended temperature setting lies between 0°C and 4°C for the cooler section, and between -18°C
and -22°C for the freezer section.
Instruction: The ambient temperature, the frequency of opening the door and the position of the appliance have an effect
on the temperature in the appliance.
Take this into account when setting the thermostat.
OPERATING PANEL
1. key for setting the cooler temperature
2. key for setting the freezer temperature
3. key for super cooling or super freezing or the holiday mode
4. key lock
DISPLAY
A. Temperature indication of the cooler section
B. Temperature indication of the freezer section
C. OFF symbol
D. Super cooling symbol
E. Super freezing symbol
F. Key lock symbol
G. Holiday mode symbol
SETTING THE TEMPERATURE OF THE COOLER SECTION
Press
on the operating panel to change the temperature of the cooler section. The temperature of the cooler
section can be set between 1°C and 7°C.
Press
until the required temperature is shown on the display. While setting the temperature, the indication
flashes on the display. After setting the temperature, the operating panel is locked automatically and after approximately
30seconds the display switches off.
The temperature of the cooler section is shown on the display when one of the doors is opened or a key is pressed.
After setting the temperatures, the appliance continues to cool until the set temperatures have been reached.
Allowtheappliance to reach the required temperature with no food. Usually this will take 2 to 3 hours. After this, you are
ableto fill the appliance with food.
If the ambient temperature rises, set the appliance to a lower temperature position in order to be able to guarantee
theinterior temperature.
SETTING THE TEMPERATURE OF THE FREEZER SECTION
Press
on the operating panel to change the temperature of the freezer section. The temperature of the freezer
section can be set between -16°C and -22°C.
Press
until the required temperature is shown on the display. While setting the temperature, the indication
flashes on the display. After setting the temperature, the operating panel is locked automatically and after approximately
30seconds the display switches off.
The temperature of the freezer section is shown on the display when one of the doors is opened or a key is pressed.
1
2
3
A B
C
4
F
G
E
D
24 • English
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inventum JB010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inventum JB010 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 13,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info